Mechanized plastering - benefits and working arrangements

Mechanized plastering surfaces - is the process of applying special blends using the equipment for the purpose of leveling and decorative coatings.It is used for both exterior and for interior works.The most justified the use of mechanized plaster to cover large areas.

Advantages mechanical method

Mechanized plastering, compared to manual work performed in the classical way, has obvious advantages:

• better adherence of plaster to the wall, as it is deposited it under high pressure,
• economical consumption of plaster,since the machine does its thin uniform layer and spending to the end;loss solution are reduced 5 times,
• wall obtained perfectly smooth, without stains and cracks, and the coating itself is more durable,
• minimum preparatory work, thorough coat is not required, resulting in cost only to this stage are reduced by almost half,
• intimes reduced coating time compared to manual work (a few people in 8 hours can perform the work of more than 100 square meters of walls),
• such surface dries in less than a week, after which you can proceed to further finishing.

If to analyze and calculate the final amount, which will cost plastering manually by professional artists, it becomes clear that, in addition to other advantages, Mechanized plastering of the walls will be cheaper by 10-30%.

Progress and machinery

Job Application plaster mechanically divided into the following stages.

1. solution Preparation takes place on site, and also mechanized.The dry mixture is poured into the unit where it is mixed with water automatically in the correct proportions.All of these actions take place in the chamber of the machine and does not require additional equipment or containers.
2. then applied by spray plaster on the walls.The device is capable of supplying the jet to a distance of up to 80 m and 60 m, consequently, can not use the stairs, and the work is accelerated.
3. For particularly smooth and high-quality coating further alignment is required.A fresh layer of plaster is leveled by a long rule and spatulas, excess solution is removed and redistributed.
4. After an hour and a half, when the plaster grabbed perform grout to impart smoothness walls.Especially carefully treated joints and corners.
5. completely plastered walls to dry for 3-4 days at high humidity - for a week.After that, they can be painted and apply another finish.

Application equipment allows you to create really high quality coating of plaster with high thermal insulation, soundproofing and aesthetic properties.