Conductive adhesive produce at home

manufacturing process

The first thing you should prepare the following materials:

• tube of superglue - "Moment" or "seconds" or even nail polish brand AI 156 or colorless "SC";
• soft a pencil (suitable for both the M2 and M4);
• pliers.

After that go to the manufacture of conductive glue at home.Sharpen a pencil and a piece of pencil lead bummer.Stem own mash on a sheet of paper, to get a graphite powder, as in the photo below:

Furthermore, if you decide to make a conductive lacquer of superglue, gently expand the tube from the back side, which is tightly coiled into a tube.Now you need to go to sleep unpacked powder through the back of the tube (the ratio should be 1: 1 with a prescription).To texture was smooth, stir it with a match or a needle.When homemade glue is ready, wrap the tube, as did manufacturing plant and for secure hold twisting pliers.The means to restore the tracks on the board is ready, you can proceed to use it.

recommend also see the instructions in the video, which shows how to make their own conductive adhesive using a graphite rod and nail "AI 156»:

Where can I use a mixture of?

Homemade conductive adhesive, as we have said, it is recommended to do in order to restore the tracks on the board, for example, in the repair of the TV remote control or the keyboard.Very often recommend hams produce a consistency in order to restore the connection on circuit boards where it is impossible to use a soldering iron.Motorists, such a mixture can be useful in the repair of the rear window defroster, if the contact broke off.

This is all that we wanted to tell you about this issue.Hopefully, you now know how to make a conductive adhesive with their hands, and what is it for domestic electricians and hams!