Build Daily

Стройматериалы для дома

August 12, 2017 18:06

Standard sizes of plastic windows - all typical series of houses

click fraud protection

This question is often interested in those who are just beginning to "build".What do the window openings in the walls, on which the size of PVC windows to navigate, are there any standards?As for the buildings operated, there is easy - you just have to make the necessary measurements.Let's try to deal with "standards".

If you study the relevant reviews (and there are many), which specifies a number of different nuances (species profiles, the number of double-glazed windows, shutters, arches, etc.), then come to a conclusion, no special training is almost impossible.Especially since there are always certain tolerances, depending on many factors.

zamer_okna

Therefore, focus on any single meaning no standard, and there are several reasons.

First , not all manufacturers accurately maintained the recommended sizes.They take into account the most common parameters in the construction of window openings, and "under them" and customize the size of the blocks.




Second , there is a certain tolerance, and which should be followed.According to the SNP, the side clearances (wall - unit) may be in the range of 1.5 to 3.5 cm after installation of windows and their fixation anchors voids "zapenivayutsya.".Consequently, a small «±» is not critical.

Third , in the projects of the vast majority of apartment buildings appear frames made of wood, and not from the "plastic".So, we need to choose PVC windows have "in fact" under a certain size.

Practitioners recommend to focus on such indicators (in "mm"), depending on the "series" (type) of the house (apartment buildings are meant):

137 series

Leafs 2 - 1 420 1 150;

3 - at the same height as the width of 1 504 700.

series

Leafs 2 - 1 530 1 510 (for 504D 1 420 1 100);

3 - width 2240 (respectively width of 2030).

505 series

Leafs 2 - 1 410 in 1450;

3 - the same height, width 2 600 030.

series

Leafs 2 - 1 420 2 680;

3 - 1100 to 2 360.

600.11 series

Leafs 2 - 1 410 in 1450;

3 - width of 2 606 050.

series

only double-leaf in size for homes "600.11."

«Stalin" building

1 900 x 1 500 (2 folds).

Panel "Khrushchev»

  • 2 flaps - 1340 x 1280;
  • 3 flaps - 1 500 x 2 040.

Conclusion

  1. Uniform, well-defined sizes to date does not exist.There are only approximate, and which need to be guided.
  2. When determining the number of blocks and parameters must be considered:
  • total glazing area shall conform to 1/8 to 1/10 of the total surface of the floor in the room;
  • smaller window size, the greater the share of the construction occupy the frame elements.Consequently, the "less than" the glass and thus decreases the level of brightness of the room.
  1. much easier to make "plastic" windows to order, since experience shows that not all openings on the dimensions are the same (natural uncertainty in the construction).In addition, ordering multiple units, you can count on a significant volume discount, which provide virtually all of the company specializing in the production of PVC windows.

instagram viewer