Factory and improvised hopper buckets

accelerate and facilitate the task of plastering the walls and ceiling solution will help a special device - a plaster shovelhopper bucket, which automatically sprays the solution onto the surface.The device is perfect for large areas.Produce can be independently from scrap materials.This will be cheaper but can be purchased in hardware store: device is about 7,000 rubles.

Application Bucket

bucket factory production can be wall and ceiling.The models differ in the type, in particular pen-holder structure.At hopper wall is bent at an angle of 45 degrees, while the ceiling - 90 degrees.

Buckets are universal and, except plaster, are adapted for use with such materials as:

• concrete mixtures;
• cement-sand mixture and cork;
• textured paint;
• liquid wallpaper.

Hopper provides better adhesion solutions, improves the quality of plastering due to the greater impact strength mixtures of surface.Each bucket plastering equipped with compressor - that it makes it possible to carry out spraying the solution.At the bottom of the bucket located nozzles, which are supplied air flow.Fully bucket is released from the mixture for 3-5 seconds.This one hour one master is able to plaster 60 square meters of the surface layer of 1-2 centimeters.

technology plastering

Before starting work put up beacons, wall or ceiling moistened with water.If you plan on spraying, establish a reinforced mesh.Since the plastering process via the hopper there is a high speed and 3-4 minutes of the device consumes about 50-60 kilograms of finished mixtures are kindly requested to make a large supply solution.It is recommended to automate this process by using a concrete mixer or a mortar.Compositions for coating, plastering proportions.

to spray mixture need to start immediately after its preparation.Range pounce selected depending on the desired result, usually a factory or homemade plaster hopper kept at a distance of 4-5 cm from the surface to be treated.When the process is complete, plaster leveled rule, and after drying overwritten.

bucket must be rinsed after use

It is simple: it dipped into the upper part of the tank with water, and then include the compressor for blowing nozzles.Remains of the solution are removed from the tool work area manually, using rags.If, during the plastering is required to take a break, doing the same thing: the hopper is dipped in water and washed, but is left in the tank as long as the work does not resume.

independent production hopper bucket

Although buckets for plastering are relatively inexpensive, and rent any model can be taken at a reasonable price, some masters prefer to make your own tool.The hands are usually necessary to collect only the bucket, the remaining parts purchased.

Widget from SocialMart

Pattern one-liter bucket is shown in the scheme, but the plaster shovel drawings is different, and if you will improve it in its sole discretion, this would not be anything wrong.Details hopper cut from a sheet of metal.Of Scheme bucket is made of aluminum and reinforced with two strips of aluminum.Its elements are connected by screws.It is important that the edges between the parts had no clearance, as the product will flow.To solve this problem, you can use metal corners and linings.If the hopper is made of more durable material, such as a hoist, it makes sense not to use screws and welding, and the problem with leaking disappears by itself.

Bucket recommended to equip a comfortable and sturdy handle.Presented in the drawing model has left it to the main weight load fell on his right hand.If the master - left-handed, then attach the handle to the right side of the hopper.

also plaster scoop hopper equipped with fixtures to hold the spray gun and the hole where the device is inserted.It should be noted that the self-made models of less power than the factory that have two, three or four nozzles.Some craftsmen added nozzle, hoping to increase the performance of their devices.However, with one injector per liter of mixture is sprayed 10-20 seconds, depending on the consistency of the material.

bucket put on a spray, to the last mounted hose leading from the air compressor.Enjoy homemade hopper should be the same as the factory, except that an acceptable distance from the wall more - 15-20 centimeters.It is necessary to closely monitor so that when scooping the solution he did not stick to the outside of the bucket.

If a plaster shovel hopper bucket with his hands gathered, it is required to take care of her as well as for the factory model.The product is washed with water in the tank, mortar remnants wash cloth.

In general, home-made hoppers little inferior to what the factory, except for one restriction: they are suitable only for use with the walls.Plaster ceiling with the help of hand-assembled bucket uncomfortable.If there is such a problem, it is necessary to make a new hopper with a modified structure, and sometimes - even to buy another sprayer, with more ergonomic handle.

In general, as vtomatizatsiya process of applying the plaster on the wall will save you a lot of time and effort. main difficulty will be only to level applied to the treated surface solution.Find out how much will need to plaster, help calculator.