How to install an electric convector on the wall ?

installation instructions

So, if you decide to install electroconvector on the wall, we must act as follows:

1. Unpack the convector and turn on the back side.
2. Remove the bracket.
3. Lean filmed bracket to the wall at a suitable location (which will be installed) and check the marker mounting holes.If
4. wooden wall screw fixing with wood screws (40-45 mm length).If the wall is made of concrete, pre-drilled a hole punch, and then hammer dowels and follow the installation box, as in the photo below.
5. Put electroconvector to set the bracket.
6. Plug into a power outlet, turn on the power.
7. Set the right temperature on the thermostat.

As you can see, the installation of an electric convector on the wall is not a big deal, the connection even more.However, there are some nuances that need to be taken into account during installation, which we describe below.

few tips

Sometimes it is necessary to establish electroconvector on the balcony, which provided interior PVC panels.Since the weight of the electric convector can reach several kilograms, you need to understand that plastic can not withstand such a load.In this case, it is recommended to choose electroconvector compact size, for example, as a model company Nobo in the photo below.

Another caveat - the proper placement of the convector.Typically, the kit is included with the purchase of an instruction in which the manufacturer specifies the optimal distance himself from the floor, windows and other objects.If in your case this information is not available, install an electric heater in accordance with the general rules:

• height of 20 cm from the floor;
• gap from the wall 20 cm;
• lateral distance to nearby objects - 20 cm;
• top and front gap of at least half a meter;
• outlet at least 30 cm.

Special attention should be paid to the connection of the electric convector to the network.As a rule, the devices power less than 3 kW, so if you have a house or apartment has modern wiring, safely connect power from the wall outlet (they tend to withstand up to 3.5 kW).If you want to hide cords and make a neat installation, you can even connect to electroconvector straight to the mains without a plug and socket without.To do this, you have to pull a separate cable from the junction box or even a panel (if you decide to make a separate line for heating).Cable cross section in this case, select 2.5 mm2.

Here and all installation instructions of the heater.We hope that you now know how to properly install electroconvector and connect to the network with their own hands!

will be helpful to read:

• How do the wiring in a wooden house
• How to save electricity legitimately
• Compare heaters and convectors