One-level ceiling of plasterboard with their hands .Installation of suspended ceiling video

you really wanted to make a pendantplasterboard yourself?It's pretty easy for people knowledgeable in this matter.People who deal with repairs do it quickly and on the machine.If you are a novice in such matters, and you wanted to make your own installation of suspended ceilings made of plasterboard, this work will not be easy.But our site - repair of apartments with their own hands will learn this from the photo and video instruction.If that is not clear, please ask in the comments, we will answer.

One-level ceiling with his hands

The ceilings of plasterboard have a number of incontestable achievements.It hides all the shortcomings of your ceiling (cracks, roughness, etc.) under a ceiling is very convenient to hide the wires.And, the most important advantage is a smooth surface.

Ceilings of plasterboard is very varied and numerous in terms of design.You will be able to make such a ceiling of plasterboard, for every taste.In selecting and imagination has no limits, they are of different colors, there are single-level, multi-level.The ceilings of gypsum board can improve the lighting in your home, apartment and give it a uniqueness and elegance.On the suspended ceilings have a very convenient light as you see fit.It is possible to carry out the sound insulation of the ceiling, which would save a lot of noise.

This ceiling is suitable for any room, so to speak the "universal."You can do this even the ceiling in the bathroom, pre-need to process sheets with a special compound that repels water.Now consider how the installation of the ceiling of plasterboard with their hands.For this kind of picture is presented below - guide, we tried, that was the most obvious and simple.You will be available a video on assembly and installation of the ceiling alone.

How to make a false ceiling of plasterboard with their hands?

1. Basic (starting profile along the perimeter)
2. main (bearing frame profile)
3. Longitudinal profile (for toughness and reliability)

There are only two technologies Installation of walls sheets.This technology is called Knauf and gypsum plasterboard.You are free to look them up and evaluate.Skilled craftsmen prefer technology gypsum plasterboard, as our suspensions and profile, so to speak the foundation of which is the entire supporting structure false ceiling and which are attached later, sheets of drywall, to put it mildly, are not made according to European standards, as in other matters a lot ... OneIn short, it would be good to make a qualitative and suspended ceilings, to include savvy.

design your ceiling from GKL, especially, should be strong.And all the other parts (fasteners, suspensions) should be very well secured to the very bottom at a distance, that would not give the sagging drywall sheets.Because it leads to the sagging appearance of cracks between the joints of sheet and the appearance of hillocks.Under mounting drywall need to choose quality materials and technology.

Materials and tools for installation of false ceiling plasterboard

Primarily this special hangers (pictured left), which shall be attached to the base.Whatever they are firmly and securely fastened, use so-called anchor - nails (photo on the left) or metal anchor - wedge.More preferably - dowel - nail.To the suspension by the so-called "kids", as shown in the figure below the numeral 1 (screws with gimlet for the metal, they are better than "enter" in the profile) attached profile width of 70 mm.Then go do the sheets of plasterboard 12.5 mm, bolted their screws indicated in the photograph on the right under the numeral 2. In length, vymeryat each piece themselves, depending on the size of the ceiling.It takes just a laser level.And do not forget about the roulette table, pencil, hammer and screwdriver, not do without it.In the video tutorial below, all clearly shown.Calculate the required number of sheets and profiles, components, will help our free online calculator.

Installation example single-level ceiling with his hands.

First you need to identify the line for the original profile, use this to help laser or water level.The distance from the ceiling must be 10 - 20 cm. Make so that it was possible to hide electrical wiring, communications, etc.Place the level on the rise.The contour lines of the pencil mark on the wall.Then attach the rails along the perimeter of the room on this horizontal line dowels step 350- 500mm.apart.

next step is marking the ceiling under the main load-bearing guides.First you need to hold parallel lines more than 1250 mm, it is somewhere half a sheet of drywall.Sheets of drywall are attached with a small gap between them, and when we putty that you could fill with a mixture of plaster to seal the joints between the sheets.Basic Profile will be held at the edges of the sheet and in the middle, keep in mind.And along these lines will be secured to the metal anchor pendants - wedges or plugs size 400mm.

Now you can take the rail profile and insert them into the starting frame, which we fixed on the perimeter walls of the room.The only thing that is not desirable to do is insert them up against the wall, you need to leave a small gap, so that there was no ceiling on the deformation of various contingencies in the likeness of thermal expansion.Consequently, the insert guides our hangers.Guides to fasten screws suspensions for metal 2 on each side of the profile.On the horizontal check necessarily a long level or a laser.

Widget from SocialMart

further installation of the ceiling of plasterboard with their hands, involves marking and insert the longitudinal profiles (photo on the right).It is recommended to look at the specification sheets of drywall mounting cross rails about 600 mm, and the longitudinal - 400 mm.design options you can choose for yourself and look at the video.Here we look at the cross-bracing.You can easily cut the longitudinal profile of the guide metal scissors to the desired length.Then insert the longitudinal profile between the guide also in increments of about 500mm.They must be positioned so that the ends do not fall at the place of fastening guide profiles with hangers.

longitudinal profiles are attached to the rails, using special crabs, pictured above.Whatever design was stronger, use a different structure for securing the longitudinal profiles.To fasten two supporting profile segment and are inserted into longitudinal.It is this method is very well strengthens the structure.Fix the longitudinal profile, you can use suspensions, approximately in the middle of each.

can be used for rigid attachment to the ceiling profile pieces of the same profile, but it has to be pre-cut at the edges and fold the letter G. For convenience, first measure the distance from the ceiling to the lower edge of the profile, it will be cut point and leave for about 3 centimetersbolt in the ceiling.Note that you need to fix dowel closer to the edge profile of the fold to prevent sagging under the weight of sheets of drywall.With this method, you can make your own hands suspensions of any length and ceiling can be raised or lowered a little to the desired distance.Important tips on how to avoid common mistakes during operation, be sure to see the secrets of working with a profile.

Fasten sheets of drywall to the frame of the ceiling alone

Here and ready for the main frame of the ceiling plasterboard.Now it is necessary to sheathe sheets of drywall.Before that treat each leaf from the ceiling with a special primer, it will improve waterproofing, after mounting the treated and on the back side.Back down from the wall a few millimeters, which would plasterboard breathing.Attach the sheets across the longitudinal profiles.First, attach the sheet to the wall, and the next one is already starting with the first longitudinal profile.The distance (between the wall and longitudinal profile) seal the half sheet.So we go through the entire ceiling.Secure the drywall sheets to all the laid profiles with screws for metal in increments of about 15-20 cm.

Caps screws do not need much utaplivat, they should be nearly flush, but that did not stick out above the plane of the drywall.This will help you stop screwdriver with stiffness expose so as to achieve a limiter responds to light recessed screw.Make gap between sheets in 2 - 3 mm, to further embed the seams gypsum mixture.

That's all.It remains only to cover the joints, which are formed between the sheets.We need to putty the ceiling is completely pre-primer to pass it, with putty may need to tighten the screws sticking out.What would be good to seal the joints using a special mixture of gypsum or a mixture.On her sticky superimposed reinforcing mesh of fiberglass.And smooth with a spatula all, that it is not stuck.When everything is dry, Align the divorce from all areas leveled fine sandpaper.Likewise processed and gaps which are formed between the wall and the sheets of plasterboard.Ceiling fully puttied gypsum mixture, as in the photo below, try to do it without a divorce, if you do a painting, if under the wallpaper, then this may not be seen.

Here and ready false ceiling plasterboard, made with his own hands.Then you can do with it whatever you like.Wallpaper glue, paint and so on.If you did everything correctly, the ceiling will serve you for a very long time.Ceilings are multi-level and it is written here.Now check out the video installation instructions, to consolidate the knowledge to practice.

Videos how to do their own installation of a suspended ceiling

simple way to self-assembly of the sheet on the ceiling without assistants