What is an electric gun is better to choose - practical tips

What is the gun, known to almost everyone.Such sprays paints are of three types: mechanical, pneumatic and electrical.Let us dwell on the past and look at why it is the most attractive electric models and how to make the right choice.

fact that all products intended for coating of surfaces by spraying, or operate using low or high pressure.The use of a particular model depends on whether the surface is covered with paint, and what kind.Therefore, the use of low or high pressure depends on the technology of the work.

Electric spray guns are also universal.Included with them are interchangeable accessories that make it possible to paint any type of surface.Such spray guns may be used for any paint spray or solution.Their weight depends on the specific model, and reaches 25 kg.For one hour elektrokraskopultom can be treated with an area of ​​about 250 m2.Thus there is a substantial ink savings compared with other staining methods.And more importantly for the "at home" - do not need a compressor.

What requires attention when choosing a gun?

1. nozzle cover. product to serve as long as possible, should be selected with airbrush of stainless steel lid.
2. Sealing components. clear that the spray paint in the "system" should be some pressure.We need to look not only at the condition of all existing gaskets, and ask which ones are included in the spare parts kit (Kit).
3. capacity Fitting Position paint. This reservoir can be either from above or from below.Therefore, should choose a model with which it will be convenient to work for you.However, the "experienced" people are advised to buy a model with overhead tank.This is useful when you have to work with thick paint.And yet - if the tank is "lower" position, you will have all the time to keep the gun vertically, and it is not always convenient.
4. material from which the tank is made. Here it is necessary to choose one of two things.Tanks of metals is much easier to clean out paint, but they are not transparent, and the control during ink consumption, as well as it is left in the tank is impossible.Plastic tanks are transparent, but more difficult to clean.As they say, the choice of an amateur;
5. Housing material. Very well, if the case is made of durable plastic.Such a gun and beat hard, and he had a small weight, which will greatly facilitate the work;
6. width of the plume. clear that should be considered, for coloring any areas of the spray gun is used.If you apply paint to a large surface a little "trickle", then it will require a lot of time.After all, no one will not paint the floor with a brush to paint.If a torch, they can be dyed, and fine detail, but the paint consumption will be significant in this case.This width depends on the length and the "hose" gun.Therefore, such a nuance, as a "Torch", it is better to check with the seller and choose an appropriate model for themselves.If this kind of work you often have to deal with, it is necessary to have two different gun.And save time and money (in the paint);
7. Possibility of battery life. implies the possibility of battery life and its presence in the kit;
8. ink viscosity. We must ask what the liquid is capable of spraying this model.

for domestic needs should focus on options such gun (average):

• performance - 0.5 l / min;
• tank capacity for paints - from 0.5 to 1 liter;
• capacity - about 0.5 kW.