Dismounting the air conditioner with your own hands - with video instruction

reasons for removal from the place of the components of a split system can be different - overhaul of the room, moving to a new home.If dismantling of the air conditioner to invite a specialist, for this service have to pay from 2800 to 4500 rubles (depending on the model).But not the main thing - how many have to wait for the wizard?And if the circumstances are such that there is no time?We will understand how to do everything with their own hands.

Recommended operating procedure

The first thing to do - to make sure that the ground is not disturbed.Elementary precaution, not more.

Next - a common algorithm of actions.With self-dismantling (as well as the installation of a split system) must take into account all the features of the installation system to connect to the specifics of e / nutrition and other nuances.

Removing refrigerant from the indoor unit

• gas is circulated in a closed circuit.Consequently, the way his admission to the indoor unit should be shut.To do this, close the tap on the fact that the outside (external).It is located on the relevant thereto copper tube (thin).To tighten it, need Allen key.
• include air conditioning.Mode - cooling.

number of issues and problems can arise here:

First , the system will immediately give "failure."Very rarely, but it happens.The solution is simple - to connect an external unit directly to a wall outlet.Naturally, this requires at least a basic knowledge of e / Technology.If the host is perekommutatsiya such complexity, it is not a sin to seek and who knows a neighbor.Output is always there.

Second , so as "to drive" the system?The exact answer does not give anyone.The duration of the work depends on the model.By the way, this secret is not love to share customer-service employees, so as not to lose potential customers.But the analysis of all the comments and advice on the matter can be concluded that within 60 seconds (± 2).

In operation, the air conditioning gas is removed from the indoor unit, and partially - from the connecting tube.Naturally, some loss of Freon in the further dismantling of the system can not be avoided, but it is self-dismantling costs.

device is turned off and the valve overlap to the second outdoor unit suitable for tube - thicker and further tightened the first (if necessary).All - coolant "driven" and plugged in a condenser.

De-energizing the system

If plugged into a power outlet, then it is pulled out.If you connect directly to the shield using an extension cable - breaker switched off and disconnected all the ends.

communications Dismantling

Where to start?How convenient.The task - to remove all the tubes and wires.The main difficulty is the disconnection from the indoor unit.If you need it "squeeze" from the wall, no need to be afraid of - the body is fixed only at the top, on the horizontal bar.

Removing the indoor unit

no difficulty in this.Just open the cover of the housing, and immediately becomes clear.As a rule, the block is lifted just a little bit up and over.By the way, this is a good time to clean the air conditioner, as well as filters.

Outdoor unit

If disconnection are made, it is simply removed from the landing "nests".The difficulty is that it has a considerable weight.Each model of this parameter a.You may need and help.But how to work together in the window opening, so as not to interfere with each other?All this is necessary to think.

Recommendations

• If you intend to transport the unit and it is unknown when it will be mounted again, all the connections, it is desirable to close the caps.For example, twisted pieces of fabric, a dense paper.But this must be done in order to prevent dust in the channels.Otherwise, the wizard will have to call and pay for a compulsory system cleaning.
• When disconnecting the tubes, the ends of wires necessary to tag (label).In addition, all the sketch.It is not known when the reassembly will be made, so rely on their own memory and that with time tags are not erased, it is not necessary.
• Note that foul dismantle the outdoor unit often leads to coolant leakage.So, you need to call a specialist for his injection.The work itself is estimated low (about 650 rubles), but quite expensive gas.Recovery from an external unit is comparable with the cost of the services of professionals for dismantling.If you do not have confidence in their abilities, it is better to contact them immediately.
• When transporting the air conditioner should be careful.The most "gentle" part of the system - a vacuum pump, which is quite expensive.Plus - its installation and adjustment of the system.

And the last - before analyzing the air conditioning system, the device should be examined is the model, the principle of its operation at least in general terms.Climb with a screwdriver and key "blindly" - a guarantee that the climate will have to give the unit for repair.