Playground in the country - look at the main options for buildings

to your child it was nice to spend time at their summer cottage, it is desirable to build a playground there.There are several types of platforms, each of which is intended for children of a certain age:

1. playground with swings.
2. with a tree house.
3. with swings and other.

about each of the options we discuss in this article.

to construct a sandbox in the country

Sandbox can be:

• a) open;
• b) closed.

A little later we will look at both options, but before that I would like to talk about a very original idea of ​​supplementing children's sandbox.

Sandbox with "secret»

order sandpit was not a primitive construction of four boards, you can do the following.

Secret first.Complement sandbox easy assembly / disassembly.We will need about forty-stumps of the size that we will treat with antiseptic and dug into the ground.The very design of the form can be anything, but it is better to hemp were big: it is possible to form a special track of them, which would be children running.

Secret second.It is possible to make it in the form of a table.By the way, even some factories have resorted to such.this table will serve the children "an office", having to create a favorable atmosphere of the houses.

Secret third.It is possible to build a sandbox in the shape of a sailboat, using an old tractor tire.We also need a wooden stick for a mast, sail decorated.

open sandbox

first stage.Prepare a place.Sandbox is desirable to equip the right near the windows, so that the child was always in sight of their parents.

second stage.We pull out a pit for the construction.The width of its boards should be about 2 meters, and the depth - 0.4 meters.

third stage.We equip a special pillow, using building rubble or gravel.This will be our drainage system.

fourth stage.In every corner of the pit set timber - the future support of our design.

fifth stage.On each side you want to attach planed board, pre-painted and treated with antiseptic.

sixth stage.Fasten additional board seat.

seventh stage.We fall asleep about twenty centimeters of sand, preferably a river or from the store (in which the sand is less than glass) previously trotted it through a fine sieve.

Closed sandpit

During the work we need agrovoloknom, planed boards at 1.2 meters each, plywood, hinges for doors and meter board.

first stage.Preparation.Actually, the first five steps are the same as in the previous embodiment.Just repeat them.

second stage.To the bar, which serves to support, fasten the additional tier of boards.

third stage.Getting to the manufacture of roof.We measure each side of the sandbox and cut the required size of the plywood sheet.After that, we cut it and fasten the hinges.

fourth stage.On each side of the structure fastened agrovoloknom that subsequently spreads to the bottom.

fifth stage.By combining the two pieces of plywood through the loop, we fix itself agrovoloknom.Actually, this work ends, it remains only to paint a sandbox.

The main advantage of a sandbox is that it is around the clock to protect the sand from falling debris, so clean it in the future do not have to.To learn more, read the article - how to make a sandbox in the country with their own hands.

Children's rocking

This rocking diversifies playground.It is a fairly primitive structure, which is best done in the form of fantastic animals.So, here are the basic steps of manufacturing.

first stage.Prepare the necessary materials - the solution, animal figure and a great spring.

second stage.We pull out a pit for the foundation.

third stage.Fill the pit with a solution and put it in the spring region, in order to further structure was quite stable.

fourth stage.After solidification of the solution is attached to the figure of the spring, it is desirable to previously prepared a place for sitting.

fifth stage.Enjoy how the kids having fun on a shaker!

Classic teeter

For the construction of this design also will not need too much time or money.What we need to do?

first stage.We will need a pair of three-meter boards, seat with backrest, wire and galvanized pipe.

second stage.Roy two pit, approximately 60 centimeters each.They fasten the boards, pre-treated with antiseptic.Fill all the concrete and wait until it dries.

third stage.On the bar fasten galvanized pipe, which, respectively, put a chair with a back by a cable.

fourth stage.For security, you can sharpen the rough edges of the chair.

addition, we several times to increase the strength of our design.Thus, children will be able to ride the swings few people at a time, even adults.Instead of a pair of poles to be installed six, instead of the usual seat should attach more and more capacious.By the way, and the car seat can be used for comfortable seating, moreover, it is much softer.

Videos - children's playgrounds in the country with their own hands