Build Daily

Gardening

August 12, 2017 18:06

Drinker for chickens with their hands - instructions for the manufacture of Video +

click fraud protection

Hello dear subscribers portal Stroy-Shkola.ru.Today, we discuss with you how to make drinkers for chicken with their hands.This article will be useful primarily to those who keep the country economy, namely, raising chickens or other birds.So, let's begin.

Drinker for chickens with their hands

Drinker for chickens with their hands

drinkers for chickens can be divided into three categories:

  1. Normal drinkers.
  2. vacuum.
  3. Nipple.

They can be purchased in the store, but you can make with your own hands.Consider drinkers each category in more detail.

conventional manufacturing technology drinkers for chickens

Easy (not to say primitive) of drinkers is that the chickens just drink water from a special tank.This can be a regular bowl or bowl, a piece of pipe and so on.Perhaps the most basic method of chickens water supply.It is necessary to put in the chicken coop a container with a liquid, it is imperative that it is not too high - then the chickens will not be able to get it.The advantages of such drinkers is the fact that it can be done in a few minutes.But there is a flaw drinker may roll or birds will bathe in it.

Sample mass drinkers for chickens - photo

sample mass drinkers for chickens - photo

In this regard, more suitable troughs, made of pipes.Below are the stages of its manufacture.

Step 1. Required materials.

Regular Drinker (bowl ) for chickens

Regular drinker (bowl) for chickens

for DIY manufacturing drinkers from the pipe, we need about two meters of plastic pipe with a diameter of ten centimeters;mounting brackets;plugs;and finally, removal by means of which water will be poured.By the way, on the other hand can be set drinkers one outlet through which water will drain.

Plastic pipe serving for water supply

plastic pipe serving the water supply

Step 2.

The pipe cut a hole (you can use a heated knife or jigsaw).Do not forget in the process of processing the edges so that they do not have sharp, pointed.In a place set brackets and only then fasten the pipe.If chickens are found in the cell, you can use the same scheme, but a slightly different attachment (it is shown in the picture).

Make a mount for the plastic pipe

Making mount plastic pipe

Pros and cons

The advantages include the fact that you will be able to contain a large number of birds in the yard and feed them at the same time.Furthermore, this scheme can be used for turkeys.It can be made so that it flowed in the rainwater, if desired.

But there are drawbacks.First of all, the drinker is severe, so it is often necessary to clean the sponge.In addition, have to shell out for the purchase of plastic pipe (recall that will fit an ordinary bowl, which can be found in any home for the previous version).

vacuum drinkers manufacturing technology

The essence of such drinkers is as follows: in a special reservoir is water that is under pressure is not discharged to the outside.As a tank, you can use anything, but we will describe the circuit with a three-liter jar, which we installed on a special stand.

Video - vacuum drinking bowl for chickens of the bottles with their hands

Materials Needed:

  1. glass jar.
  2. Four wooden coasters.
  3. Bowl.
  4. And, of course, water.

installation description is impractical because it is a fairly simple procedure.Everything you need can be found in the picture.

The sample was vacuum drinking bowls for poultry

sample vacuum drinking bowls for birds

Pros and cons

main advantage can be called is that it does not require special material investments.In addition, installation is simple, and the operation - convenience.But, of course, there are drawbacks.Firstly, you need to buy some supplies.Secondly, such a trough is fairly easy to overturn, and chickens can climb it and get dirty.

nipple drinkers manufacturing technology for chickens

This is probably the most expensive option of manufacturing drinkers.This is because in the process you need plastic pipe, traps droplets and, accordingly, the nipple.One of the most important things here is that you must grasp the essence of the most nipple drinkers.This can be done using the above pictures.

Driving nipple drinkers for chickens

scheme nipple drinkers for chickens

So, start to work.

Step 1.

connected to the necessary capacity pipe with water, and then put the plug.Mount it indoors henhouse.After that there is only screwed nipple and catcher drops.

Step 2.

Now actually about the catcher.they can serve us as usual cropped plastic bottle.Its main purpose is that the water does not flow in vain, and the birds will be able to have a drink later, when they want.

Video - Nipple drinkers for the course with their own hands

Pros and cons

The advantages include the fact that avoids the formation of stagnant water.In addition, you can equip the automatic water supply line - to connect to the water trough.After that, you do not have to constantly monitor its level in the tank.

Now the drawbacks.First of all, it is a significant cost.Also, large chickens can climb the structure and simply break it.And this is some of the costs.

As a result, it should be noted that all the above methods of manufacturing drinkers can be used as for chickens, "cell", and for those who live "in the wild".

instagram viewer