House of foam blocks with their hands : the ideal low-budget construction

How to build a house out of foam block: preparatory work

first stage of construction must be to obtain all the necessary permits for the construction of buildings, development of the construction project, including a scheme of water supply and sanitation, as well as sewage, the calculation of the required amount of materials.

person then who is interested in how to build a house out of foam blocks, it is necessary to pay attention to the training area.And only after this task is completed, you can go directly to the site layout and to lay the groundwork.

A good option in this case can be a strip foundation.Install it in several stages:

• excavation;
• cushions laid under the foundation (layers of gravel and sand);
• installing reinforcement cage;
• installing formwork;
• preparation and concrete pouring.

But after the foundation is finished, you will be able to rest a week or even longer, until it completely hardens.Dedicate this time selecting and purchasing appropriate foam.

How to build a house out of foam block: move to the device walls

begin masonry walls only after being on the surface of the foundation will be laid waterproofing material.And to cope with the task you will be a notched trowel, special adhesive and laser level, or you can use the leveling.And of course, in the process have to ligate blocks - is made in a similar manner as when using bricks.

order to improve the performance properties of the construction it is advisable to carry out reinforcement of walls.For this purpose, immediately after laying the first row of blocks, around their perimeter to be laid two parallel slot into which later will be placed metal rods.Moreover, the slots should be rounded at the corners, and the procedure should be repeated reinforcement every four rows.

How to build attic and roof

further considering how to build a house of foam blocks, it is important to stay on the arrangement of the ceiling, the attic and roof.Overlapping of the idea to make a strong wooden beams or slabs factory and used board width of 30 mm for the binding.Ready Truss clapboard produce waterproofing, and then placed a preselected roofing.

Installation of windows and doors, as well as the design of the facade

final stage of works to be carried out a man building a house out of foam blocks with their hands are the installation of windows and doors, as well as the design of the facade.And it can be used for exterior finishes:

• plaster;
• siding or decorative panels;
• brick or decorative stone;
• decorative paints that are applied to the pre-padded layer of plaster.

All these finishes allow to achieve excellent aesthetic effects, as well as provide protection wall construction from the negative effects of the environment.So if you look at the photos depicting modern houses made of aerated concrete, it can be noted how attractive they look and harmoniously.