At what height to hang the sink - decide all questions of installation

What you need to replace the shell?

With the development of building technology simplifies repair their own hands every day.Today in this area there are many technical solutions that allow even a novice to cope with this task.Due to the damage, or simply aging sooner or later the question of replacement.

Shell Replacement occurs in two stages: dismantling the old and installing the new bowl .If you decide to replace it with their own, need such tools: a set of wrenches, hammer, screwdriver, pins, brackets, level.

make room for a new shell

To remove the old sink the first thing off the water.Turn the mixer tap and make sure that water does not go.First you need to turn off the sink from the sewage system, and if it is integrated mixer, and then from the water supply system.Next you need to remove the siphon and drain.

siphon attached wide bottom nut shell, it can be unscrewed by hand.After that you want to remove the drain from the siphon and pull himself toward the siphon.If the shell is fastened to the wall with bolts, it is necessary to unscrew them.You can now remove the old version.In most cases, it lies on the brackets.

Before you put the shell (meaning new), make sure that the brackets are rigidly fixed and leveled.If they hang out, it's best to remove them and attach the new with the help of punch and dowels.The shell rests on brackets and additionally fixed to the wall with the coupling bolts.

At what height, and how to fix the sink depends on its configuration.If it goes without base or pedestal, then hang the wash basin can be at a convenient height you.Otherwise, the height is limited.tables or pedestal advantage is that they hide the drain, making the appearance of the bathroom more accurate, the lack of a fixed height.

make installation yourself

shell connection - simple procedure, if strictly follow the instructions.First you need to install the drain grate to the sink, and it priladit siphon.It is better that he was with a corrugated discharge pipe, it is more convenient to install.If the sink hole is provided for the mixer, it is necessary to connect.The mixer is fixed clamping nut and below him are screwed pipes for water supply.To avoid the flood, it is necessary to comply with connections for leaks.

To reduce the likelihood of leakage of water to a minimum, on the threaded connections can be used sealing tape FUM.Also it is possible to resort to using sealants for sanitary needs, there are special offers on the market today.

Further, using the drain pipe, the siphon must be connected to the sewerage system.You can now open the water for inspection.Carefully inspect all connections for leaks.If done accurately according to the instructions (connection diagram of the sink is included), the term of service will give you a shell of its durability, and problems with flooding of neighbors will not.

Now you know how to connect their own sink.As you can see, this is no big deal.By installing a washbasin in the home, you will gain valuable experience and save money, as well as experience the pride for their work.The main thing to take on any job with a positive attitude and responsible.