Decking Larch - both lay their hands

Decking Larch - basic properties

quality decking gives the perfect opportunity to decorate the veranda, terrace, part of the space around a country house.However, it is understood that it will experience not only the functional load directly, but also the influence of the environment.That is why you should choose a plank of wood that will last you a long time.Experts say that the best option is decking of larch.It meets all the requirements that are now imposed on the material type.

board from larch is resistant to moisture, so it is easy to tolerate such precipitation as snow, rain, and even hail.

It does not fade and does not lose the attractiveness of the natural pattern exposed to direct sunlight. high density wood and make it necessary processing wear-resistant and practically immune to mechanical damage. You can not be afraid that it will remain the traces of falling furniture or hard objects.Modern larch board meets all European standards, for example, its moisture content does not exceed 8-12%.

Laying decking - open and hidden mounting method

decking installation is carried out in several stages:

1. Preparing the ground for supporting lag.At this stage the concrete pouring site and subsequent leveling screed.
2. Laying supporting lag, which subsequently attached.
3. Directly laying planks.It can be done in two ways: open and hidden.

Open method of larch wood decking installation is the most common.This is due to its simplicity and ease, saving time on installation.This method is as follows: just prisverlivayutsya terrace boards from the front to the laid joists.The most common screws with anti-corrosion coating is used as a fastening element.

One of the main disadvantages of this method of laying of the board is that the screws are visible, that spoils the aesthetics of the coating.

If this point is crucial to you, then choose the technology concealed installation.In this case, each board via the lamellar cutter saws sides.Recommended cutting depth - 25 mm.To connect terraced boards together using special metal plates with the same anti-corrosion coating.They are screwed with screws to lag, so the attachment is not visible on the floor.

Care terrace board from larch wood

not enough to properly lay the board for terraces.For its longevity requires careful and timely care.Thus, the board of larch wood is recommended to treat restorative compositions.They prevent its aging and maintain pristine appearance.The best time for processing - fall and spring.As a rule, it is enough to do 2 times a year, but when excessive load recovery procedure can be carried out up to 4 times.

larch wood is resistant to the processes of decay, but will make wax emulsions floor terrace or veranda practically eternal.

In addition, you should regularly clean the surface coated with a special detergent diluted in water.If you notice a spot on the floor greasy, use a degreasing agent.If it does not work, try to solve it by using a wire brush, however, act as carefully as possible.In no case do not use solvents!In order to avoid the deterioration of the water flow from the floor surface regularly inspect the seams between the planks for contamination.