Stucco facades - direct the veneer

plastering facades - what is it and why should I use?

plaster façade for many years determines the appearance of the building and its operational characteristics.Like any facing material, plaster, in addition to decorative functions, designed to resist the destructive influence of the environment, while improving the heat and sound insulation characteristics of the building.

plastering facades allows you to align the surface of the wall to hide the seams of masonry and various minor defects.As a building material Stucco is a mixture of the components of binders and fillers.As the latter used lime, sand, plaster, cement.

Typically, stucco exterior decoration is not the final step: the treated and leveled surface paint applied.However, there are also fine samples containing dyes in its composition and, therefore, suitable for the finishing coat.However, their application requires particularly careful handling grout surface filler, followed by applying a primer.

Recently, a simple application of plaster directly on the front wall of the building was replaced their pre-insulated with mineral wool or polystyrene, to which is attached a reinforced mesh.Cladding materials are different types of plaster facade, which is considered below.

Types of stucco facade - brief facts

Acrylic stucco is sold ready to use.The binder used therein acrylic resin dispersion, whereby the coating has the ability to pass steam.This suggests that contained within the walls of the excess moisture will evaporate freely, which in turn significantly reduces the humidity inside the building.The acrylic coating is elastic and resistant to temperature extremes.

Mineral plaster is known as the most durable kind, as a binder in it are cement or lime.Moreover, it is the cheapest in its class.Available in a mixture of dry binders, various additives and filler-crumbs.The main drawback - the limited range of colors.Flow façade plaster is 16.5 kg per square meter at 10 mm layer.

Silicate plaster should be seen as a kind of mineral.Binder - potassium waterglass.Available in ready-to-eat.The main advantage - an excellent steam-power.It can be used in areas where unsuitable acrylic plaster, for example, in the cellular concrete.

silicone plaster - the most expensive type.It is based on binding polymer compositions.Elastic, it has a high vapor permeability and can be painted in different colors.And another feature distinguishes it against other finishing materials - the ability to self-cleaning: the rainwater quickly washes away the dust and dirt.

Stucco facades - the main rules of

technology plastering facades samples discussed above is the same for all species and quite easy to carry out on their own.To learn how to apply stucco facade, the video attached to the article, informed in detail and clearly, as we recall the main stages of work, and their features.

Recall that before the plaster facade of the house, it should be thoroughly prepared: remove the old paint on the surface to make notches and seams clean masonry on the greatest possible depth.All this will provide increased adhesion and prevents crumbling plaster.

then sprayed on the wall is applied to prepared according to the package structure, and with such force that it stuck to the wall, but not sprayed on the sides.After a few hours (the exact time specified on the package) you can begin to grout special board with two handles, making it the rotational movement.