Battens under the decking - behind the scenes work of the installer

What is crate under the decking?Profiled

- material that protects the roof from exposure not only precipitation but also of fungi, bacteria, and as a consequence of failure.It is a quality roofing material helps keep the building for many years.In fact, the crate is a special design, made to fit the roof parameters, material for the manufacture of which serve a variety of bars, metal elements.

reliable and able to withstand heavy loads, they allow you to create a good framework on which are stacked and roofing materials.In some cases, the surface of the fixed metal frame, which is screwed to the metal or wooden crate.Double protection makes it possible to create an incredibly strong base that is not afraid of high loads.

Variety corrugated

Experts identify several types of roofs, but in order to get the job done well, it is necessary not only to choose the right option, but also take into account the move crates under the decking.The carrier used in the embodiment of sheeting when strong pressure is exerted on the surface.

the case of large construction, winter it pushes a huge mass of snow, a large area of ​​the roof is also a huge load, which can cope with only powerful, carefully thought-out design of strong materials.Correctly chosen crates device under the decking will get rid of all the problems that may arise during the construction and operation of buildings.

also often seen roof decking, which is easily distinguished from other variants by the presence of specific waves.This roof is much cheaper than metal, but also can withstand heavy loads.Wall floor can be used as material for the creation of formwork or fences.

How to crate a profiled?

At the beginning of the work is to make a special pattern of plywood to help navigate when installing the boards for crates and securing the first and second part of the initial batten bars that fall from the roof of the bottom.

This batten step for corrugated board should be about 280 millimeters, between successive timber - about 350 millimeters.

This distance allows to collect qualitative structure and prevent any unpleasant surprises.Vertical parts must be stacked at a distance of not more than 250 millimeters.Such a dense mesh design make incredibly durable.You need to purchase material depending from the roof into account parameters recommended distance from one bar to another.

So, if the parameters of the roof 3x1.5 m, and the pitch between the horizontal bars Set 0.3 m and vertical - 0.25 m, then you will need 5 bars 3 m long and 12 boards for the 1.5 m long if.solid materials have such parameters, it is possible to fill lengths within a few bars, in an amount giving a desired length.Therefore, when traveling materials calculates the total length of the boards or beams.

Correctly executed roof battens under the decking can be fastened using the screwdriver.Reliable tool will make your job as quickly as possible.Long screws help to firmly secure the board and create the right design.When installing the board in a staggered manner, respecting the distance, in the end, you get a dense grid on which the roofing elements are installed.