How to stop the flow of water

What you need to stop the flow

In order to begin work on stopping water leaks in residential areas, it is necessary to prepare a number of tools and materials:

• wrench.
• large number of rags.
• bucket, a basin, a large bowl.
• clamp.
• piece of rubber.
• Wire

How to stop flowing water: an action plan

work to stop water leaks may consist of several turn-based events:

• call emergency service.
• beginning of works to eliminate leaks.
• Remedy leak between radiator sections.
• Decrease water pressure.

Step by step instructions on how to stop the leak.

Step 1: Dial a phone number special services

With such a phenomenon as stopping water leaks is best not to try to cope with their own hands.After all, this phenomenon can lead to damage and repair the furniture not only your apartment, but also from the bottom neighbors.Therefore, during the flow of the pipe, you must call the emergency brigade.If the phone is out of the emergency service of instant access, it is necessary to use a reference or to find out the phone the emergency service water utility in your region from the neighbors.

Step 2: prepare yourself to stick to flow (phone service does not meet or stalling)

After the emergency service was called - should begin preparatory work on the maximum reduction of the negative effects of the leak.Emergency brigade arrives instantly and you will have time to make every effort to reduce the impact of negative consequences.First of all you need to substitute a place flowing a large vessel.This vessel can be a bowl, large bowl or bucket.Then you need to try to stop the flow means at hand.If the flow formed in a straight pipe or at the junction, the flow can be stopped with the help of the finished clamp.If such a device is not at hand, it is possible to construct a temporary clamp a piece of rubber and wire.To do this, attach a piece of rubber to the pipe and wire primotat it.This device will greatly reduce the flow or stop it completely.

Step 3: how to stop the water between the radiator sections

If a fistula through which the water leaks, formed between the radiator sections, it can be eliminated by using a gauze plug.It can make by soaking gauze bandage or a piece of epoxy glue and then firmly primotat flow to the place.If leakage was found on the heat sink, it can be eliminated by using cold welding.It's important to stretch your welding and paint over it a crack, through which flow occurs.

Step 4: try to reduce the pressure of water flowing

If a leak is impossible to eliminate or reduce with the help of available funds, it is necessary to try to make a smaller flow pressure.This action may be accomplished by imposing on dense tissue break location.This can also be done using improvised plugs, which might make of the tape, cloth and salt.The first step is to cut a suitable piece of cloth, then sprinkle with salt it, then using adhesive tape to attach the cap to the place created by the flow.

Thus, the article has been described and characterized the process of eliminating leakage of the pipeline system in the living room with his hands.