Balconies Finishing - a great way to expand the storage space in the apartment

Warming fence

balconies with their hands Decorating must begin with its insulation.Double-glazed windows are doing their part to protect against wind and cold, but the balcony railings in this design is the weakest link.For its insulation creates wooden crate.In its cavity insulation sheets are mounted, the overlap should be adjacent to the walls and floor.As a heater, you can choose any material, but the most popular is polystyrene.Thereafter wall usually sutured some decorative coating: paneling, wall panels, etc.

Sometimes balcony combined with a kitchen.In this case, it is appropriate to decorate ceramic tiles to give a smooth transition between rooms.Use an ordinary tile is not recommended for such purposes.This is due to the fact that the balcony, though insulated, but the temperature difference is still noticeable enough on it.Plain tile to such swings poorly adapted, so you need to choose this factor resistant material.Applying a ceramic coating is not suitable and if settling balcony as recreation areas, because it enables cold, it will not add comfort.

Tip!To finish the balcony is best to use the tiles for the exterior.

Finishing balconies with their hands - mounting lathing

ceiling level is considered to be the upper part of the glazing.The most correct option is when lining suited to the very bottom of the frame.Around the perimeter of the ceiling mounted rack with a pitch of 50 centimeters.Further, a heat insulating layer.The gap between him and the wall and the frame should be no more than 1.5 cm, in the future he zapenivaetsya.Particular care must be filled with foam space frame joint with a heater, as this will make the sealing more reliable.After all these procedures, additional fastening to the transverse mounted average rake, with the result that gets bόlshuyu stiffness of the whole structure.

next stage of work - is the crate walls.Lower rail mounted on the floor level, and the top - in the ceiling.Between them to align the plane stretched cord.Coming off the floor the rest of the bars are mounted so that they move no more than 50-60 centimeters.The joint lining gets to the level of the sill, so there must be laid the control board.After that, the insulation is installed, and the surface is finished with the selected material.

Note!Fixing lining is best done with the help of screws and klyaymerov.

Exterior finish balconies

Balcony - an architectural element of the building, so it must support the general external appearance of the structure.In connection with this envelope should be in accordance with the standards of compatibility.

for cladding the following materials can be used for balconies:

• siding;
• profiled and corrugated sheets;
• linings;
• plastic panels.

outer skin and is attached to the crate, a step which should not exceed 40 centimeters.As a plating material often used siding.However, working with them requires skill and experience.Therefore, if you do not know how this coating is produced finishing balconies with their hands, the video on our website to help you with this.

Important!Exterior finish balcony is performed first, and only after it is completed, you can start the interior trim.