Select and install ceiling moldings for ceilings,

Forms for the baseboards stretch ceiling

If we consider the types of skirting boards, which are suitable for stretch ceiling, we can distinguish two: foam and polyurethane.The first - a simple and convenient for installation, in addition, inexpensive.The big drawback is the fragility and inflexibility.It can quickly collapse under the influence of any solvents.Because the glue to secure it should be carefully selected.Suitable composition Titan , designed specifically for this purpose.In some cases, use a special putty.

Polyurethane moldings are more flexible and durable.But, at the same time, and expensive (in any case, more expensive previous).An important advantage is that it easily used in those cases where the necessary rounded edges, i.e. it is very easy to bend.

Plus, you can mount it on a much larger number of adhesives, since it is less prone to all sorts of damage.The disadvantage of this material is its dimensional.Over time, it can bend under its own weight, cracks or gaps between the coating and the wall, which is not very nice.

plinth mounting technology for ceilings

Once installed ceiling cover, start mounting plinths.It can be carried in two ways: on the putty to wallpapering and adhesive. Better, of course, the first method, as it has a number of advantages.All arising gap can later be repaired the same filler.And they themselves wallpaper easily fit under the ceiling set by the plinth.The obtained result will delight you.

However, if the wallpaper is already applied, just check that the base is clean and dry, and use the second method.Be sure to pick up this good adhesive, for example the time of installation. arisen gap can gloss over the same composition.

When using this method is always worth remembering that the baseboards incorrectly attached may result in damage of the coating, because if you want to dismantle it, painting the ceiling itself can be stretched.

To protect the coating from getting at him adhesive polyethylene is used.Next, using a tape measure, measure the number of required skirting and cut it with a hacksaw.Begin working with the angle.Take the fillet and secure it to the wall (or glue or putty).While the angles draw up special "corners".If those are not available, then cut them yourself at an angle of 45 degrees.Next plinth butt glued to the previous.

few words about the care of the ceiling covering and skirting

Process care of this surface is fairly simple.It is only necessary to remove contamination occurring.Usually, this procedure is done 1 time in 3 years.In the typical Mr Muscle window can be used as a detergent.In the case where the coating is heavy soiling, it is sufficient to wipe with a damp cloth.

Attention! When cleaning the cover, do not use this mixture atsetonosoderzhaschie.This can lead to a loss of appearance.When serious stains can be eliminated by using alcohol or white spirit.

In the event that damage (broken) for any reason, the ceiling surface, it is necessary to secure a space with tape or adhesive tape to the hole is not expanded.If the defect is in the inconspicuous place, then it can be repaired (to make a neat patch).But it is better to invite professionals who carried out the initial installation of the coating.