Facade board - excellent cosmetics for your home

What is the facade board?

Wood is divided into soft and hard rock, and just last more resistant to atmospheric conditions and temperature changes.They do not deteriorate from ultraviolet rays, absolutely do not crack (under the influence of time can perhaps that darken), but due to special impregnation also a very poorly lit by direct contact with fire.Usually, it is from such wood, such as larch, manufactured facade board, which is very similar to the battens.

It is best to choose for decking, it has a ridge along one edge and a notch on the other.Going facade coating is very easy, on a "ridge in the groove."Sometimes even interior facade "Rustic" is a completely different type of board, with bevelled edges, which has wider side is the back.Very interesting version of the typesetting plate (so-called board for facade cladding) of the bars glued larch.Any type of cladding boards angles unlike edging slightly rounded.

sheathing board and care

If you have covered the walls of the house wood paneling, this does not mean that you can completely forget about them, wood requires annual maintenance, inspection and, if necessary, repair.First, do not let the sheathing board was covered with dust and dirt, small particles on a smooth surface of wood under the pressure of the wind, or by streams of rain will play the role of an abrasive, and gradually become a rough surface Planck.From time to time the walls need to be washed, preferably not a jet from a hose and rags, so longer, but safer.

Luck facade board can not cover, but with special oils will not hurt, especially after a few years of operation, choosing shades of oil covering a few shades darker wood.So you return the former appearance trim.

If you took the preservation of the board, ie the material pre-impregnated with all the necessary compounds to protect it from mold and insects, it does not mean that the substance will be valid forever .Every few years, you need to manually trim coat antiseptics (if you are using oil as a coating process should be done prior to its application).

Installing paneling

Blockhouse only rebuilt, but you want to go further and refine its cladding boards?Then have patience, because to do so before will complete shrinkage of the walls, is not recommended, all your work will probably ashes.When it finally comes time to exterior finishing, think over what kind of board you want to see on the walls of his house.

If shpuntirovannaya board, congratulations, it is very easy to install, insert the comb into the groove of one another enough.If the bar is made to connect the "Rustic" or "polurustik" styling is even easier - just drive the narrow edge of the board under the overhanging wide.Sheathing "in polurustik" to perform better from top to bottom, in other cases the line of work does not matter.

When working with shputnirovannoy board mount it on the wall crest up, so you can avoid the accumulation of moisture in the grooves.

Sheathing rarely attach directly to the wall of the timber, and especially from a log, in which case the roundness prevent logs make a smooth finish.Therefore, to begin to fill in the wall bars from 6 to 8 centimeters thick, vertically or horizontally, depending on how you position the board.

If the wood trim is suitable to drive a nail into it, the installation is quite simple, otherwise you'll have to drill holes in the boards and put the coating on the screws .Unfortunately, some wood species do not tolerate Welding of nails, cracking along the annual rings, or in the direction of the fibers.For mounting adhesive may be used, but in any case not water based.