How does the cladding clapboard indoors ?

Decorating the walls lining: select the type of wood

before will be interior wall lining, it is important to choose the type of wood from which it is made.There are products of coniferous and deciduous arrays.First - are universal, because they can be used to furnish both external and internal walls.

is substantiated by the fact that the composition of the wood contains a large amount of resin, which prevents the ingress of moisture and mildew, that is a kind of antiseptic.

of the recommended softwood can distinguish pine, larch, spruce, cedar .The first two trees do not rot.Plus, pine and more easily handled through the minimum number of knots.Larch, due to the high density processed much more difficult.

Spruce has a loose structure, because the subject of significant moisture.On the other hand, the same structure can store heat.Because it can be used for rooms with minimal humidity.Cedar is easy to process and is, besides, a lot of medicinal properties.But increasingly used for the manufacture of furniture.

For hardwoods include birch, ash, oak .The first type of the array is handled well, this is not any problem arises.But it is exposed to moisture and rot.Because birch recommend to apply only in "dry" areas.

Ash valued for its unique color - grayish with yellow and pink texture.Well, the oak has established itself because it has a high density, different strength and durability, its beautiful texture can be used as a timber for the walls and for the creation of furniture.

How to sheathe the walls lining indoors?

can be performed directly fastening lining the wall, if the wooden base and differs extraordinary smoothness.However, this happens very rarely, because, most often, on the surface make the crate, consisting of rails.But first it is important to determine is vertical or horizontal clapboard cladding?If the horizontal direction, the vertical slats arranged at a distance from each other in the area of ​​0.5-1 meters.

For vertical placement, on the contrary, wall trim horizontal rails at a distance of 0.5-1 meters.This location is important for a better fastening lining.It is also necessary to crate maximally even and proportional relative to the vertical and horizontal sides (rack must be mounted in the same plane).

Therefore, in the process of work is required to use a plumb and level.Once the crate is ready, lining begins.Use at the same time can be as ordinary nails and klyaymery for decorative (cap them will not be visible).Next

made lining the walls lining the horizontal (preferably in narrow spaces) or vertically (to visually increase the height low in the rooms).The last stage is applied to cover protective equipment - varnish, wax, paste and other formulations.

few words about the care clapboard

It would seem, wall decoration wooden clapboard completed, but after you must also carry out some recommendations for care.Firstly, it can not be strongly water wet.Also, do not need to apply harsh detergents chemistries and strong solvents.If you need to remove stubborn stain, then use a poor solvent enough.Small dirt erased with a dry cloth.

Secondly, when decorating the walls in wet buildings (sauna, kitchen, bathroom) should consider protective equipment.Third, when the trim is done in rooms with high humidity, it is important to strengthen the straps so that the reverse side has always done better airflow to the air (it is in the vertical placement).

For horizontal mounting is necessary, so that the water does not stagnate in the grooves.Because for wet rooms still recommend the vertical paneling.

Note! to cover lining in wet rooms suitable lacquer Capon, Domalux .In some cases, the useful and the typical parquet lacquer.To preserve the color, use the compositions DULUX CELCO SAUNA.