Select the drywall for bathroom .Customer Reviews .

What you need to know about drywall for bathroom.

Plasterboard has long occupied leading positions on the finish, but it is necessary to understand for what purpose, what type of approach and the same options for its use.For renovation of bathrooms, there is a special plasterboard - water-resistant.Usually it is dyed green, it contains a water-repellent and anti-fungal elements that moist air does not get hurt.Skilled craftsmen are able to adapt and ordinary plasterboard repair bathrooms, but more on that another time.

So, apply drywall in the bathroom, it is even possible, and sometimes without it is simply impossible to do.It is impossible to do in those cases where the design of your room includes a large number of shelves or distinctive niche when it is necessary to hide pipes or make the scoop under the bath.Well, if just to ugliness wall curves?It could not have been done without the drywall.With GCR, we not only reduce the cost of preparatory renovations, because the cost of plaster in this case, exceed the cost of GC sheets, but also to implement the most ambitious projects the design of bathrooms.

just need to remember what is best for the bathroom drywall, and how to protect it from moisture:

1. install plasterboard sheets with a gap from the floor and fill it with glue for tiles.
2. Before you attach the sheets, it is necessary to sheathe dense polyethylene frame, so that the wrap and then the upper end of the sheet.

With these simple rules, you can greatly increase the moisture resistance of the material.

bath How to sheathe plasterboard.

To repair please you for many years, it is necessary to pay attention to all the processes of work, from the preparation to the final finishing.Therefore, even if we hide behind the walls of the FCL, it does not mean that you should not process them anti-fungal mixtures and protection against mold.To ensure a sufficient evenness of the walls, use a framework system ening GCR.With galvanized metal profiles, built frame.Around the perimeter of the room with dowels attached guiding profile, inserted into it stands at a distance of sixty centimeters.With this frame can have a niche and build box.Now, with the help of the carcass can be prepared to sew up the bath with plasterboard.

To work required:

1. galvanized profile.
2. Hammer.
3. Hacksaw.
4. Roulette.
5. level.
6. dowels, screws.
7. screwdriver.
8. Sheets moisture-resistant drywall.

principle of operation is the same, and for the construction of ducts for pipes and for niches and to sew a bath.In the beginning you need to take measurements, and then build a metal frame, and at the end of the bath to sheathe plasterboard.It should be remembered that when we prepare a box for pipes in the bathroom, check the availability or change them with new ones.If the pipes are made of metal, be sure to cover them with a primer or paint in multiple layers, pipes of any material is required to cover the heat insulation and sound insulation.We should not forget to leave room for the manhole, to have access to the meters, valves, and drain pipe in the bath.

As you can see, sew bath plasterboard, the process is not too complicated, especially when familiar with all the subtleties and even have special training.Having tried once, you will understand and easy to take up other jobs.