Build Daily

Utility And The Host. Room

August 12, 2017 18:07

Frame shed - elementary solution for truckers

click fraud protection

Site selection and installation of foundations

Construction frame barn must begin with selecting the place where it will be installed.This place should not be in the low-lying areas.This is due to the fact that in the spring and in rainy weather they will accumulate water, and construction will begin flooding.Also not the best option - clay soil, but if there is no other option, then you need to pour a foundation of sand-gravel cushion.If sandy land, it is enough to be his clear and smooth.

should lay the foundation After selecting the place.To do this, remove the top layer of soil to a depth of two feet around the perimeter of the future construction site.The resulting area is filled with gravel and sand, and the top layer of gravel is poured.This creates a cushion under the foundation.Its thickness is small, about 10 centimeters.Next to it is placed a grid of valves, made formwork and poured concrete.To concrete cracking did not occur, it must be wet with water for several days, thus maintaining it in a wet state.

Important!The stronger the foundation is made, the longer it will stay the barn and the better its walls will be protected from moisture.

Frame barn: the installation of its base

easiest frame barn - a framework of wooden beams, which will later be lined with any material.Also, the walls can be made of brick or combine both options, laying several rows of bricks, and they mount the frame.This option is considered the best, as the foundation for the strength of the small cap laid in several rows of bricks.In the next brick and timber-framed necessarily need waterproofing.

This is done because the brick retains moisture for a long time, which is detrimental to the wood.For a good fixing strength of the carcass is best to use a T-shaped anchor pin.Next, set the rack in increments of half a meter, and create a top rail.Once the frame is ready for installation should begin walls.

choosing the material for walls, should be guided by their appearance and durability.The ideal option considered planed boards, since they are well drained water and easy to dye and process antiseptic.The best location is considered to be vertical mounting boards.So they do not put pressure on each other, and each board becomes support, improving the fortress of the whole structure.

Important!Planning board mounted vertically, it is necessary to think of the frame so as to be cross-strap for fastening.

Make a roof for the barn

Doing brick barn with his hands, it is necessary to think in advance the type of its roof.Often used by lean-and gable roof.Covered roof recommended asbestos sheets as they undulated surface perfectly protects from moisture.Also popular are the steel sheets.They are easier to asbestos and tightness better than them.The design of the roof should be such:

  • Crate;
  • heat insulator (if you plan to do a warm barn);
  • waterproofing;
  • sheets of roofing material.

Important!No need to make a flat roof and no inclination, since it will accumulate moisture, and construction will begin to rot.

Inside the shed, consider the location of a large number of competent subjects.To cope with this task will help racks that are mounted along the walls.The lower shelves are made larger than the top, which will use them for bulky items.The upper shelves are used to store seldom-used tools.If you allow the size of the barn, you can put a table and for the various works.

instagram viewer