Illumination in the bathroom : Features installation

bathroom in the house - this is a very special room, which should satisfy all the whims of the owners.In the bathroom every day, several times there are all members of the family, so it is very important to ensure everything possible to comfort and effective use of this room.During the construction or repair of toilets, special attention should be paid not only to the choice of plumbing, but also light.On how skillfully it is installed depends usability and aesthetics of the bathroom.Today we talk about how to connect the lighting in the bathroom.

Need more light

What we used to see, going to the bathroom - bath (the cabin), sink, shelves for shower accessories, towels, and everything is illuminated by a single light bulb on the ceiling.It sounds sad, but looks even sadder.If you want to leave such a "barbaric" way of lighting in the past and make your bathroom a place where I want to stay as long as possible, choose the correct light.If you do

lighting in the bathroom properly, you can visually expand and give "air" even the tiny room, emphasize the advantages of the interior and focus on functional areas.Light helps not only to highlight the advantages of the room, but also to hide flaws, make the atmosphere cheerful, romantic and peaceful.

But above all lights need to comply with proper hygiene conditions.It is clear that all the usual actions of most people does automatically, but you will agree, is much more convenient to do it in good light.Plus, enough light will facilitate and accelerate the cleaning in the room, because everything will be in full view.

Some believe that for a small bathroom, only one ceiling fixture.But let's look at this point in more detail.In addition to the most common bathroom plumbing is many things: cosmetics, sponges, towels, hair dryers, electric shavers, household chemicals, washing machine ... The list goes on, but it is clear - in order to properly illuminate a light bulb every item is clearly not enough.It is especially difficult to arrange lighting bath with his hands in the Soviet-built houses, because there is very modest squaring and contains a lot of items.

Bathroom 4 m² must have at least 2 lamps and lighting fixtures, ideally should be in each functional area.For example, to apply makeup or comb your hair, you have a lot of light in the vicinity of the mirror;to find the right cream or take a razor does not hurt to put a shelf in the bathroom with the lights.If we approach the issue in detail, it is necessary to install the lamp so that the light is evenly distributed along the top, bottom and center of the bath.Most of the world should be in the middle - 70 cm from the floor and to the level of a person's face.However, this parameter can vary depending on the average growth tenants, so it is necessary to adjust individually.

If the bathroom is quite small, there is, in fact, can be limited to one a good lamp.But it must be sufficiently strong and diffuse light uniformly throughout the area.But if we are talking about putting more than 5 m², the lamp should be installed and on the mirror, and near a bathtub or a shower, on the ceiling and even the floor.For very large bathrooms you can buy decorative lighting fixtures that are both additional light source and fill in a roomy area.

for simultaneous illumination of the ceiling and walls is best to choose fluorescent or halogen lamps.During installation, it is important to direct the flow of light - it should go straight down to illuminate the surface of the floor, table and shelves.Sometimes the lamp can produce extremely bright light and dazzle the eye, then they can be turned slightly sideways.

Zone lighting

We have already mentioned several times about functional areas, and is now getting to the subject closely.Even the smallest bathroom need zoning.This means that the room should be visually distinguish between several sectors: bath or shower, sink and adjacent shelf with cosmetics and a mirror, a working area with soap powder, washing machine, ironing board etc.Depending on the magnitude of the quadrature sectors may vary as well as their number.If the room has a niche, one can make a small separate area with individual lighting.

must start, perhaps, with the most important object - bath.old sample products do not differ elegance and technical perfection, but today you can find a truly extraordinary bath with the built in illumination.This plumbing looks very impressive and meets all safety standards.But to buy a luminous bath can afford not everyone, so we will look at how we can highlight profitable normal bath.

Options baths zoning with light:

1. Install the lamp directly above the bath so that it was from the beam directed light, plunging the rest room in the shade.Then, in such a bath you can relax and give your eyes a rest.
   
2. Hang sconce with a shade of colored glass, then the situation will become more calm and romantic mood.
3. If low ceiling in the bathroom, but squaring pretty big, group them in one place on the ceiling a few colored lamps.Then you will be able to achieve the effect of color demarcation space - shades will gently succeed each other, creating an unusual atmosphere.
4. to beautifully illuminate the water, use a floor lamp about 2 meters high. Naturally, you can not use the bathroom lighting fixtures applicable for the living room or kitchen.They have to meet certain standards.The most important rule of all light bulbs in the bathroom - not pass water.Water-repellent characteristics should have also lampshades, stands and other details.
5. Place lamps on each item of sanitary ware - sink, faucet, bath or shower.The main thing that lights do not interfere with the functionality of the room.That is why many people choose firmware or outdoor lighting.The latter refers more to the decorative type, but it is undeniable that in the bathroom with the lights in the floor is much lighter than without them.Now almost every store you can find plumbing faucets with built-in lighting.It looks nice, "colored water" - light is directed to the filter and gives the flowing water the desired shade.
   

floor illumination in the bathroom should be made by means of special fixtures, load capacity, friction and direct contact with water.The design must be completely sealed and shockproof.The ideal option would be lamps, designed for installation in the garden plots (light paths, stairs, etc.).These are small items 5 cm in diameter, which is set into the floor to a depth of 9 cm. It is obvious that the installation of a lighting bathroom requires a little raise the floor level.Power bulbs in such lamps typically less than 5 watts.

bath Backlight

options for bath fixtures so much that sometimes it is very difficult to make a choice - you want to install as many different bulbs can be, LEDs and ribbons.But an excess of shapes, colors and degrees of brightness can play against you.To make a harmonious and functional lighting, equip the first most important functional areas, and then see whether you need to add light, or all, and it turned out well.

looks very beautiful LED lights in the bathroom, which surrounds the tub or the floor around her.The LEDs can be put chaotic composition that simulates the starry sky.Just imagine how magical will have a rest, lying in warm water after a hard day and admiring the shimmering "Constellation"!

LED lamps are ideal for the bathroom:

1. For them a sufficiently low voltage, so they can be safely installed in areas with high humidity levels.
2. They are completely safe from an environmental point of view.
3. You can increase or decrease the intensity of the glow of LED lamps.
4. LEDs save a lot of electricity, compared with the usual "light bulbs Ilyich" and even with energy saving lamps.Energy costs are reduced by 60-70%.

LEDs allow you to organize the target illumination, directing the light to the desired area, eg, over a sink, a mirror, in the shower or on the shelves.You can install the cabinet for the bathroom with light, which is activated when the door is opened, in the refrigerator.

light from the ceiling

illumination of the ceiling in the bathroom can be done with the help of spotlights, long halogen lamps, LED strips and other electrical appliances.For a small room on the ceiling of one lamp will be enough, and the rest of the backlight can be dispersed on the walls, plumbing and floor.

The large rooms in the ceiling lights must be located above the bath, washing machine and sink.It is not necessary to use powerful lamps, moreover, it is better to confine not very bright lights and do not solve the problem of quality and quantity.Low-power LEDs, for example, can be installed virtually anywhere, including in the ceiling, and the electricity they will leave just as little.

organizing lighting in the bathroom, it is recommended to pay attention to products with conductive elements and the tires, because they are able to significantly expand the range of possibilities.Halogen lamps are recessed and open.Recently installed in a false ceiling type of waterproof drywall or plywood.Also on the market you can find halogen lamps that cut into directly into the concrete floor.

Typically, these devices provide directional flow of light that goes strictly to the floor.Such a solution is not always convenient, so you should put extra spotlights, to obtain diffused light.

Halogen lamps are very different, and they can be fastened to any surface.With their help, you can make a bright illumination on the wall in the bathroom, in a closet or under the sink.You can create original combinations of mobile light sources, which at any moment can be deployed in the right direction or even removed.

Lamps for mirrors

Experts recommend setting the backlight is not above the mirror, and on either side to the face evenly covered.If the light will go on top or on one side only, on the part of the person neozaryaemuyu will fall shade that is impeding when applying make-up or during skin care procedures.You can hang sconces, spotlights deliver, but the most unusual and original effect is achieved thanks to the LED strip.We only need to attach them on the perimeter of the mirror so that the light is spread evenly.

rules for the organization of lighting mirror:

1. Choose bright enough lamp, but that they are not blind.The best option would be a bright diffused light from the frosted lamps.Also a good "lens" is a lampshade made of white plastic or glass.
2. Do not set the color shades or lamps that do not distort the reflection.
3. Place the lights on both sides of the mirror symmetric, not to get a black and white transitions.
4. If your bathroom mirror set wide, then to illuminate it in full, two lamps on each side will be small.In this case, placing the light sources at a height of about 2 m from the floor installation with an equal pitch.
5. to mirror medium size best suited LED ribbon edging around the perimeter.
6. type lamps can be any, but its spectrum should be as close to the spectrum of natural light.

If you are not sure that will be able to correctly install the light in the working area, perhaps, better to buy a mirror with light in the bathroom.

illumination in the bathroom Photo

options highlights for the bathroom so much that it is very difficult to choose.We have prepared a small photo galleries the most practical and original ideas.We hope you will gather inspiration after watching and create a unique interior.