Metal pipes for hot water

Your selection: Metal pipes for hot water

How much is appropriate?

1. Metal products have not considered effective material and obsolete.
2. Corrosion exposure and the service life of no more than 20 years.
3. When installing used welding devices, which change not for the better metal structural components.Each junction leakage becomes a place of risk.
4. On the inner walls of communication may cause deposits due to the flow resistance in the pipe.
5. heat loss.The material is heated and conduct heat.
6. additional repairs.Pipes and oil paint.
7. Installation expensive.

advantages of plastic pipes:

1. Reasonable price and long service life.
2. Easy to install and no additional equipment.Set you can own.
3. devices Operation is extremely high.They do not rust and scientists, inventors estimate should be up to 100 years.
4. heat loss is much reduced, because it is inherent in the minimum thermal conductivity.
5. fittings and couplings enable assembled structure quickly.
6. Hot water can reach 95 ° C and pressures up to 10 MPa
7. There are literally tiny weight and noise insulation from the water.
8. Communication is not affected with the stray currents.
9. work with plastic pipes does not require any special additional devices for mounting
10. pipes are endowed with excellent appearance, allowing you to get rid of the need for painting.

As a way of creating heat transfer and heating networks - the choice of the material best, mainly due to the use of compression fittings, which provide strength and stability.

As steel products, the most dangerous points of the compounds are the joints and hidden communication, so for their safe use and should be applied press fittings mounted press jaws.

Polypropylene - the leader of sales in the market and on the use of

Metal pipes for hot water - the most commonly used material today for water communications.It depends primarily on how long the material can serve and under what conditions.To note: polypropylene normally operates at a temperature of 95 ° C and can withstand even 120 ° C, but only a short time.

From bad: thermal magnification.That is, if you attach the pipe without complying with some strains can be manual, but they can be avoided, if the pipes are reinforced.

pipes are inexpensive and provide the utmost reliability.Furthermore, welding can occur at low temperatures, which means that even a novice to install to deal with that.

crosslinked polyethylene for pipes

cross-linked polyethylene material is not very common nowadays, but its quality is several times exceeds the capacity of its previous mentor.These new features allow you to become a communication element for hot liquids.

durability compounds, as mentioned earlier, corresponds approximately to 100 years.The material is flexible and easy to assemble, even in the most sophisticated schemes.

manufacturers in this type of pipe produced their considerable length, thus avoiding a large number of joints that could compromise your system security.

from the system disadvantages: expensive material.

importance

pipe diameters normally to install plastic pipes for hot water professional always pays attention to the choice of the diameter of the communication, and therefore you should choose the diameter of the system.He was selected on the basis of several parameters.

1. water consumption.
2. length communications.
3. resistance of the pipe surface.

So as not to make a mistake in the calculations, it is necessary to dedicate this business professionals.

Nevertheless, if you want to do the wiring inside the apartment, you must use a 0.5-inch diameter, for a hot water pipe - ¾ inches, and if a large flow of water, it is possible and 1 inch in diameter.

for different conditions and facilities selected a variety of pipe.Since this is no problem, but is afraid of high temperatures and possible melting of the material.Fortunately, the classic water systems do not reach those figures the temperature where the material can be deformed.Operating for many years, you will be provided!