How to unscrew the bursting of the bulb from the socket ?

So, the easiest solution is to disable the lighting line, then use pliers plinth gently grab and gets out of the cartridge, which remained.In general, nothing complicated, and time such an event does not take much.The only drawback - high probability of damage the cartridge, but if you do it carefully, no problem.

immediately draw your attention to the fact that the dismantling of the bulbs you will be doing with the lights off, so you must be sure to take a flashlight.If the light is gone, and there is nothing suitable on hand, try to highlight the phone, too high-quality lighting is not needed!

There is another option to unscrew the light bulb that blew itself - take an ordinary plastic bottle, a little lighter to melt the neck, and then paste it into the broken base for 10-15 seconds.Once the molten plastic hardens, gently twist the bottle counterclockwise.This simple life hacking Electrician certainly will not hurt the cartridge and does not take a lot of time to extract the bulb burst.

There are plenty of simple options that will effortlessly unscrew the broken bulb, which broke when turned on.For example, to replace a broken flask can kartoshinu, lump tape (sticky side out), dried soap, paper, etc.These items should be firmly inserted in and gently twist anti-clockwise (if one does not know which way to twist the light bulb).

Visual Video Lessons learned object:

By the way, in most cases,the bulb is broken when removing the cap become attached, which is stuck in the cartridge.That in the future could easily become attached to unscrew the bulb, before connecting it, paint over base pencil (graphite will prevent subsequent boiling).

• How carefully remove the spot light
• What if broken energy-saving lamp
• Why triggered RCD apartment