Build Daily

Construction Calculators

August 12, 2017 18:08

On-line calculation of brickwork on the walls of the square

click fraud protection

Content

  • 1 How to make payment masonry calculator?
  • 2 What data you get when filling out the form online - calculator number of bricks in the masonry?
  • 3 Calculator brickwork
  • 4 How to make payment amount of solution masonry?
  • 5 Calculating the number of bricks and mortar for masonry own

Before you build a brick house will be to draw up a calculation of the number of bricks in the masonry, and in this case a wonderful assistant will be online calculator that implement calculation of the number of bricks and mortarfor future construction or cladding structures, as well as other related materials.Due

calculator for calculating the amount of clutch can be calculated masonry mortar, flexible ties and the result will be as accurate as possible, depending on individual parameters entered by the user into the table.

How to make payment masonry calculator?

Methods bricklaying

Methods bricklaying

Brick is the most popular and common building material is used for a long time and pleases neat appearance.To date, there are several types of bricks for the construction of buildings:

  • bricks from clay and other fillers, called adobe;
  • ceramic, most used, of baked clay;
  • silicate, made of sand and lime;
  • with the addition of cement - hyperpressed;
  • clinker from special composition;
  • refractory.

Such materials are used for a laying house, and for the construction of additional finishing in the future, creating a facade, interior designs.Fireclay brick can endure high temperatures, as well as a variety of heating and cooling cycles without loss of strength.

Bricks can be hollow, porous, the most widespread standard size of timber - 250-120-65 mm, with preliminary calculations the size of a brick masonry brick consumption increased by 10 mm for each parameter.

What data you get when filling out the form online - calculator number of bricks in the masonry?

  1. The total length of all the walls of buildings on the perimeter of the structure.
  2. total area of ​​the outside of the masonry walls.
  3. wall thickness will be considered based on the thickness of the finished wall and the mortar joint size.
  4. total number of bricks and the total weight of the material.
  5. amount of the solution to the entire clutch will depend on the ratio of the components and the introduction of additives.
  6. A length of flexible connections will be determined by the total wall thickness, taking into account the amount of thermal insulation base.
  7. Number of masonry grid will improve the overall strength of the structure.
  8. Approximate weight of the finished wall will be calculated without taking into account the weight of insulating materials and coatings.

To make a payment on brick masonry calculator - online, you need to enter the required parameters in a prepared table and click on "calculate".After a few seconds the program will give the most accurate result.The percentage of errors can range from 3 to 7%.

Calculator brickwork

masonry View: VyberiteKladka 0.5 kirpichaKladka 1 kirpichKladka 1.5 kirpichaKladka 2 kirpichaKladka 2.5 brick
brick Size: Single (250x120x65 mm) Bastard (250x120x88 mm) Double (250x120x138 mm)
area wall: m2
calculate: c light of mortar joint thickness of the mortar joint account 5mmbez
consumption of bricks:
solution consumption:

How to make payment amount of solution masonry?

order to make a solution for masonry to mix sand and cement to create the plastic mixture usually is equal to the ratio of materials to the third part sand and one cement.

But the final rate will be determined according to the specific requirements of the laying of the material and the brand of raw materials used.Often, the finished mixture is added additional additives (clinker, marble, gravel, synthetic substances), in order to increase the speed setting and increase the strength of the masonry material.

solution quantity calculation for masonry can be made using the online calculator, which in a matter of seconds as accurately determines the amount of the solution to the brickwork.

Instruments
Widget from SocialMart
kirpichnyh_kladok

types of brick joints

consumption solution depends on the selected type of joints.

This program will make a calculation based on the total volume of the cement mixture.The reliability of the data obtained will be determined within specified dimensions and wall joints.

the presence of zones of concrete walls provide the calculation of the height of the overall measurement.Building calculator solution flow to 1m2 masonry gives you the opportunity to quickly and easily make the calculation of desired parameters.

the size

Types and sizes of bricks for masonry

Such data will be guided in the value of the masonry, as well as to calculate the required amount to the construction of buildings.Depending on the additional additives will depend on the stiffness, strength, mobility and adhesive behavior of concrete

Calculator flow solution to the brickwork will help to avoid unnecessary material costs, if properly calculate the flow rate and other works, for example, pouring the foundation, wall screed, etc.

Calculating the number of bricks and mortar for masonry own

There are other options Bole troublesome calculation of the number of brick masonry 1m2 and necessary solution.How to make a calculation of the material per 1 m. A cube?

to build one cubic meter of the wall you need to take 400 pieces.bricks with a margin of 10 units, consumption norms -.. 0, 23 m3 per 1 cubic meter if you use hollow brick, the solution flow will increase by several times to fill all voids and depressions.

Without calculator brickwork onlaynnuzhno produce manually set of design data, it is necessary to know the geometric dimensions of the proposed brickwork, given the type of brick and its thickness.

Such work is best left to professionals, so as not to go on false data and not lose material investments.If you want to build the walls of 5 m and a height of 3 m, the area of ​​the wall is 15 m2, for a masonry bricks need 51 pcs.

There are many tables and prepared materials, where you can see the data cells carrying brick size, type of work and the amount of the solution used.Based on these numbers, you can get the required result.

Table consumption of brick masonry

Table consumption brick masonry

And when using the calculator masonry work according to the calculations is much faster and more accurately, with the maximum amount of deviation of up to 7%.Build and read quickly, correctly and enjoy the result!

instagram viewer