Rapid restoration of chairs with their hands at home

If your house is made on the release of old chairs - do not rush to judge them.Old furniture can be restored so that it would be better new.At the same time the appearance of the object will depend only on your imagination and effort.Taking up the restoration, you can greatly save on the purchase of furniture, for instance, to testify.Rapid restoration of chairs with their hands at home - this is the easiest way to create an exclusive piece of furniture that will decorate the interior theme.

What do I need to know and have for the restoration of old chairs

Before you begin to understand in detail in restoration techniques, look at some types of restoration work.Choose the type of restoration is dependent on the degree of deterioration of the chair.If all the wooden parts are cracked, shattered fastening and padding Easterly, then this requires a deep chair Exploded restoration with a complete disassembly of furniture.If the inexorable time affected only the appearance: rubbed fabric, faded paint, and the paint has worn off, the complete dismantling may not be required.The simplest version of the restoration - it's hauling fabric upholstery.Let us first consider the most difficult first option when you need to disassemble all the cogs on the quality of the restoration.

Complex update procedure chair

She required when this piece of furniture is completely loosened the paint peeled off from it, and padding has deteriorated.In order to fix a chair, we need the following materials and tools:

• Foam for furniture, from which we will make the seat.Its thickness choose to your taste, because it affects the stiffness of the landing on the chair.
• Stapler furniture.
• Paints, including stain.
• Two soft brush 45 mm wide and is one tough the same size.
• sure need a sheet of plywood hsloynoy 4 for the manufacture of a new seat, as old already failed.
• Any furniture glue.Well suited "Moment carpenter."
• Metal clamps for rigid attachment elements of the chair after gluing.
• Tapestry for furniture you like coloring, which can be purchased at furniture stores or convenience stores tissue.

Also listed will need: grinder, a hammer, a wooden mallet, jigsaw, screwdriver, drill, metal corners to enhance chair screws.We also need to be available about 5 days, the fact that the glue and varnish are completely dry.

course of restoration work

As a first step stool is cleaned from dust and dirt, removing grease stains from the surface.Wash the chair can be any detergent for dishes using a stiff brush or cloth.The main thing - do it quickly, because the wood does not like moisture and lasting impact from aggressive chemicals.During the drying time of the chair it is necessary to remove the seat and backrest.Most likely it will be possible to do without the use of tools.

After drying, gently shake the very start construction of the chair, trying to separate its parts.If you can not manually, you can carefully use a mallet.Note that this option is only permitted for the disassembly of the chairs which are parts joined with glue.So we did, for example, the old Soviet chairs.For the dissolution of the old adhesive can be applied such a method: moisten a cloth in hot water and apply to the site of bonding.This is repeated several times until complete dissolution of the adhesive composition.If the chair has been fastened with wooden pins, they must be carefully drilled out with a drill, choosing the appropriate size drill.

If you began restoring antique bentwood chairs, you need a screwdriver, as the assembly of these models was made by means of screws.In the event that your efforts are useless and the screw can not be, it is required to drip a little oil.When in a chair for his long life were the nails, they must be removed with the help of pliers or nail puller.

Sometimes Splice can not be due to trapped in them and the hardened resin, which is contained in the wood.To get rid of it, you need to put on a piece of hose spout and put it on fire.The steam from the boiling water should be directed to problem areas.A few minutes later the details disunite, as the resin softens.After these procedures, be sure the wood to dry naturally or hairdryer.

When all the parts are separated, they need to be numbered in order, starting with the feet.As a result, it should have at least 10 members.Each piece should be carefully inspected and glue the cracked part and then fasten them to the clamps until dry.If the surface has small cracks and chips, it is possible to use mixed with very fine sawdust glue.Such mass gently rubbed into the lesions, and allowed to dry.To hurry the process is not worth it, because haste can be very harmful.For complete drying of the adhesive is required two days.Only after this can arm themselves with sandpaper and start grinding parts.Use coarse sandpaper should be first, then smaller ones.As a result, it is necessary to achieve a perfect smoothness.

Assembly restored parts

If you see that the upper part of the chair legs are damaged, they should wrap a bandage soaked in glue and insert into the recess intended for this purpose.If this does not work, then there is only rasklinit them.All the junction of parts should be lubricated with glue and dense planting.Where there should be a wooden pins, trying to drive them, pre-manufactured.When the chair is assembled, it needs to be wiped with a damp cloth, glue and getting rid of excess dust.Then a chair is to put a bucket of water and forget about it for two days, until the glue dries.At this time, you can do by dragging seat and backrest.

Padding chair

to the waist and seat backs have to pick you like the tapestry and to prepare the foam.Then everything we do in the following sequence:

• Discontinued soft parts disassemble, freeing them from the fabric and foam.
• Freed put on a piece of plywood new purchased in advance and draw out exactly to the body.
• Using a jigsaw cut out and a new back seat.
• Put received the items on the foam and wallpaper knife cut out the contour.
• Just cut out the contour of the tapestry with a margin of a few centimeters to the hem.
• Thereafter Fabric put a face on the table, put it on the foam and plywood.
• Several pressing to the table all the resulting "cake", stretch the fabric and fasten it stapled to the plywood.This is a very crucial moment.Tensile force should be uniform on all sides, otherwise the seat will be uneven.By pulling the fabric in the corners need to make small folds, aiming for symmetry.This procedure is performed with both the seat and the backrest if it is too soft.

Finally, chair cover stain, wait until it dries, paint is applied, and after it is completely dry with self-tapping screws attached to the chair seat and back.You can paint a chair and paint with drawing ornament.It all depends on your imagination.

Self furniture restoration - the perfect solution that allows you to give a second life to old things.After a restoration of your chair will last for many years faithfully.