Installation of thermal panels with ceramic tiles

Thermopanel with ceramic tiles - a combination of insulation and finishing materials.For its production uses a thermal insulator, it is also the basis of polyurethane foam, Penoplex, expanded polystyrene and wall - vintage burned-quality brick tiles.Each kind of the basics for a specific surface, which should be considered when buying panels.

Features thermopanels

polymers used as the basis - inert to most solvents and glues, self-extinguishing, resistant to fungus, materials.From the impact of environmental factors creates extra protection coating of ceramic tiles.

main advantages of thermal panels:

• modern high-quality material;
• high strength;
• optimum steam and gas permeability;
• excellent heat and sound insulation;
• light weight;
• not subject to deformation;
• reasonable prices;
• wide range of colors;
• large variety of textural solutions;
• long service life while maintaining performance properties and appearance;
• not require special care, easy to clean.

tools necessary for mounting the panels:

• Bulgarka
• Punch
• level 2m
• screwdriver
• trowel for grouting
• level water

Basic supplies:

• · Polyurethane foam
• dowel
• Self
• Grout

mounting

with proper assembly of facade thermal panels can be achieved absolute identity of the surface of masonry.Note that the dimensions, design, mounting method of the present disclosure may be slightly different, since the panels manufacturing technology is constantly improving.

Installation is carried out in the following sequence:

1. Around the perimeter of the facade repulse a single height level.Do not forget to control the diagonal of each wall.If the diagonal has a deviation of up to five centimeters, eliminate the defect using a water-resistant gasket from any rigid material.If the deviation is more significant use crate.
2. along the horizon line of the plinth of the building mark the beginning of the finish.She ground mount aluminum profile - the ebb and rainwater starting rake.Profile desirable to consolidate below the level of the floor space by 20 cm. On the facades of the building secured upright beacons.
3. Note!To prevent deformation of the structure is necessary to leave a gap between socle profile and the blind area.
4. possible installation of a variant without a ground profile, if there is a need of the panel bury in the ground.In this case it is necessary to lay flat wooden bars or steel corner as a temporary mounting support.
5. installation panels starting from the left to lead the building of coal.Fix the casing with screws or dowels.To create the optimal density necessary to their normally eight.Thermal panels fastened in rows from left to right.Seams that are formed in places of interface panels, polyurethane foam fill.
6. Important!After fixing the first row of panels, in order to prevent the circulation of the air casing, polyurethane foam is necessary to fill in the gap between the basement of the building profile and wall.
7. The final stage of work - grouting special frost-resistant mixture.The work should be carried out at zero temperature.Overwrite the seams can be immediately after the installation of the panels, or after some time.

Video - installation thermal panels with ceramic tiles

And you install a thermal panels?- Details in the comments.By the way if you're looking for a house than to sheathe read an article about the metal siding under a tree.