Dry floor screed with his own hands - instruction

After the construction of a house or apartment repair the floor starting to do at the last moment in this tutorial, we will assume that such a moment has arrived.So below we learn to do a dry screed floor with his hands and analyze advantages over floor screed concrete.

advantages of dry cement screed before

advantages of dry floor screed or wet before pouring concrete very substantial main advantage is the ease of ties and resource time.For dry floor screed are done in just a few hours, on condition that it would be competent to carry out the construction people.

A concrete (wet) floor screed is mostly only by specialists in the construction industry and the main drawback - it is necessary to leave the apartment for a few days, because concrete must "grab" - present a few days to dry and for high-quality ties.

addition has long been known that a floor screed with expanded clay, but also with the presence of damping tape for floor screed will improve sound insulation in the floor of our times in comparison with the concrete pouring.

Also, when casting concrete floor must be a sufficient amount of cement and sand, which makes it difficult if you want to make a screed floor in the apartment, but not in the house.

stepwise process screed floor with their hands

Step 1

First remove the old floor and align it with the help of an ordinary trowel and cement and close up any holes that may hinder us in the future.

Step 2

In the second step We put plastic tape or a parchment on the floor - it will allow us to make steam and vlogoizolyatsiyu that prevents swelling of our flooring in the future.

If you stacked foil or parchment on the wooden floor, then use special materials for flooring on wood or chipboard, it is done so that when the leakage of water from the washing machine or even for anybecause you are not swollen flooring in the future, well and is quite suitable for concrete plastic sheeting.

on the edges and around walls advise you to put a damper tape, which is a great assistants to fix problems with soundproofed rooms, as well as when the laminate heats will not allow it to expand.

Step 3

third stage will blow loose sand funds or expanded clay chips, which will allow you to put an even layer of bulk material, which will serve as an excellent support for the soundproofed problems.Accordingly, the noisy neighbors the greater the need to put a layer of expanded clay - usually fit about 6 cm

Step 4

Once you level the surface suggested.you put a layer of plywood or particle board other than that an excellent surface for alignment will asbestos boards or penostirolny layer.

decking boards on the mound will have to be laid from the door and continue to the wall, which is opposite to, but note that if you h stacked insulating boards, then lay them on the wall which is just in front of the door, it will keep maintain the integrity of the filling.

Video - dry screed floor with their hands