How to clean the iron burn- improvised means

Home remedies

In order to remove the burning-on the sole, is not always required to turn off the iron, you can use a soft cloth and cotton pad.In addition, it is not necessary to rub the surface of the tin, as scratches can ruin the delicate fabric.Therefore, we provide a range of effective and proven means to care for the working of the iron surface.Conditionally divide the funds into two types: domestic and operational.

• vinegar;
• lemon;
• citric acid;
• hydrogen peroxide;
• soda;
• salt;
• newspaper;
• paraffin.

How to clean the iron burn-in using soda solution?They obmokayut cloth and simply wipe the soles.You can also put a soda pulp on the heated iron and hold for several minutes.After much rub on the burning-and under that influence, he will wash off with water and a cloth.Remains of soda carefully clean up, otherwise it will damage the tissues, which have since ironed.

also used as a water solution.The complex and difficult-to-clean stains scour for them.For him, the negative remains an unpleasant odor, so the cleaning is done in a ventilated area.Replace the vinegar can be citric acid, which also acts on the metal penetration.

antiquated, but no less effective way.A distinctive feature of iron cleaning method is to compare the softness of the paper, so the paper can be cleaned sufficiently sensitive surfaces without damaging them hard abrasive.

main thing is that the method was really working, not waiting for a serious burn-education, and to carry out regular routine.

Iron should warm up to snuff became softer, and then crumpled newspaper to rub the surface.The remaining stains should be removed easily with a damp cloth after cooling iron.

on a thick cloth to put the solution and wipe surface.Clears dark soot and lint from clinging fabrics.

This tool is very effective for the removal of residues of polyethylene or decorative plastic.

But how to clean the iron burn-salt, you ask, and the answer is very simple.She lay in a cheesecloth or paper folded and ironed on to the lumps until the burning-not appear on the lumps of salt.Also, scatter salt on a piece of cloth and pat directly soles.Gradually, the salt starts to get brown hue due to burning, which is rubbed on the salt crystals.The main thing is do not try to rub the Teflon coating on large crystals of salt.

Paraffin is used in this way.Rub the surface with wax and put the iron so that the dripped wax on the tray with him.Then include the grid.Paraffin is melted together with it melts and fumes.

How to clean the iron burn-: operational methods

In modern shops selling household chemicals indelible pencil, which advocates a kind of reagent fumes and literally dissolve it.It is necessary to rub it means warm soleplate and leave for a while.Pencil softens fumes, and it is easily wiped off using a wet rag.The method, first eliminates the agony handmade with the problem, and secondly is uncomplicated and easily accessible (affordable), as there are in every store of industrial goods.Also, in these stores you can buy non-stick pad, which is cheap and serves long.The principle of operation is obvious - does not stick.

addition to the operational methods include gidroperita tablet, which can also be purchased on a commercial store.She works on a warm iron in a ventilated area.Enters chemical reaction and emit noxious gases and for the body odor.But the advantage of this method is that the mechanical action on the device at times reduced and eliminated odor 3% hydrogen peroxide solution previously applied to the sole.

self-cleaning mode Use the self-cleaning mode on the device.But if this is not available, one can make a homemade instrument for cleaning.For this purpose, water is poured into the pan, it is added a means for cleaning and descaling citric acid, then put two sticks or cutlery.A irons placed over the structure.Citric acid and water with dissolved coating agent.Time exposure of the funds - up to half an hour.The entire device is wiped and brought to the absolute drying.To check, you can not pet the right thing, to find out whether he will be able to iron delicate fabrics.