pipes Painting: Tips from the pros to the self-taught

How to choose paint for coating

Pick up the cover, depending on how the product will be used.If the pipes are designed for hot water (for example, heating or bathroom), be sure to choose a material that can protect against rust when exposed to hot water.Seeing on the package marked "hot water" can safely take it to the store shelf.Anti-corrosion paints are: Phenol, silicone and alkyd.You can also use water-dispersible, but before this carefully primed painted surface.Oil paint should not be used due to the fact that they quickly change their color.

1. Alkyd paint.Advantages: provide good coverage, superbly tolerate high temperatures, resists mechanical stress and wear-resistant.The palette of colors of the paint is diverse.Cons: unpleasant smell even after drying.
2. Water-dispersed.Pluses: dry quickly and do not have a pronounced odor.Cons: lose color over time and need to be updated.
3. Acrylic.Pros: give a glossy shine and come from organic ingredients, a long time kept the original look.Cons: long dry out and have a stable and sharp smell of acetone and other solvents.

For cold water pipes stained materials that can resist condensation.They have to adhere well to the metal and applied without gaps.Be sure to clean the pipes of the old coating, or a new layer will peel off.Even if outwardly everything will look normal, it is possible that the old layers of corrosion and have already begun to flake.

In stores there are many types of paints.The most popular of them - PF-115, because both inexpensive and durable.But you can also use polyurethane, epoxy materials that are more resistant to various influences.

You can also try a special enamel to rust, but it is much more expensive than conventional paints, as in its composition has a rust inhibitor, adhesion primer and enamel directly.

How to paint pipes: step by step instructions.Step 1: Prepare the surface for painting

Main at the first stage of work - is the cleaning of old coatings, in particular, places with rust.To do this, use a brush tin, which has a rough stubble.Also it is necessary to use any kind of solvents.As part of the safety wear gloves and a protective mask against vapors and dust.To the old paint appeared almost imperceptibly, the surface is heated dryer, and only then begin to clean.After that, cover with a special compound purified grease, dirt and dust.All of the above is performed in order that the metal is preserved as long as possible.

Step 2: gruntuem tubes for durability life

main guarantee of protection against rust and uniform overlay topcoat is primed surface.Builders recommend the use of alkyd paints, because they perfectly cope with the preservation of steel surfaces.Soil cover and one layer before proceeding with the next job waiting for its complete drying.

Step 3: paint tube

You will need a soft brush of medium size.The paint should be applied in several layers, as it will provide a uniform coating.Best dye layer 2, with 2 minutes is applied only after the complete drying of the 1st.Do not use thick paint, because it falls under a thick layer of color and dries to form unsightly streaks.Because it is diluted with a solvent to lay flat.

Important!To protect the walls and floor of the colorful spots can lay plastic wrap on the surface and secure it with tape.

Also, in order not to have to repeat all the work again and again, the pipe must be completely dry.

How much paint:

calculation formula is usually on the packaging of paint indicate how much ink is used on 1 m² one layer.But if there is no notation, you can use a simple formula.

pipe length (area) X Pipe diameter X number π (3,14).

Do not forget to add to your account the fact that the paint is applied in two layers, and then buy the right amount of paint.

The paint polypropylene pipes

often painted plastic tube is not necessary, but to enhance the aesthetic qualities of the product, they are all the same color.For plastic, as for the metal, there is a primer, however, benefit from its use is not so much.The best colors for the polymer products are mineral, acrylic, emulsion and Phenol.The only thing that is not necessary to use a water-soluble paint, as it will soon be erased when cleaning.Use can be any color from the palette, related to the selected paint.

Demonstrating the instructions set out above is shown in the video.

Good luck to you repair!Add more color to your home!