Build Daily

Building Materials

August 12, 2017 18:08

Laminate wall - an excellent replacement for outdated wallpaper

click fraud protection

What distinguishes laminate for walls from other similar?

The underlying structure, like a sandwich.Multilayer panel has four (less five) layers composing a thickness of up to 12-15 mm, can reach up to 0.3 m in width and 2 m in length.Initially covering invented in Sweden, used exclusively for sex.But excellent consumer properties of artificial panel led to the fact that it is now mounted on the wall.

Among the qualities inherent in the material, you can select it high durability and resistance to external factors, combined with the ease and simplicity of handling and installation.During manufacture of panels formed from the manufacturer lower stabilization layer impregnated with resin.

The structural layer of the base substrate is available HDF technology for high-density material layer.Therefore wall sheathing laminate surface gives high strength much greater than strength of the popular plastic panels.

wall decoration feature laminate

But along with this, the highest popularity of laminate provides a fantastic variety of decoration: here may simulate virtually any natural material, most amazing fancy patterns and textures.This diversity, along with the quality and durability, resulting in what is becoming increasingly popular wall decoration laminate.

With all it should be noted that the technique of mounting panels for finishing the walls, as well as the installation of floor coverings, characterized by simplicity and high speed performance.Laying laminate on the wall can also hide the irregularities, without resorting to the "wet" technology grouting or shpatlevanija.

As is known, laminated panels (lamellae) can have two types of connectors: the earlier "lock" type and with improved latch "Clicks" type.This last type is so simple in the assembly that does not require any special experience and can not be installed by trained personnel.

When you finish deciding how to consolidate the laminate on the wall, you can resort to the usual wooden crate frame of bars and rods.Between the wall and the inside of the base of lamellae it is often additional insulation materials in the form of sheets of polyurethane foams or layers of mineral wools.Step

vertical and horizontal framing furring elements should provide sufficient rigidity after fixing the coating and also depends on the width and length of the panels.

Wall laminate can simulate valuable wood or stone materials, and many other unimaginable.Choosing the coloring of panels to match the flooring or selecting contrasting combinations, you can get a very modern wall design solutions in compliance with the age-old traditions.

In addition, laminates have become popular, not only imitating the color and tone of a natural material, but also its surface structure.And smooth or rough laminated panels perfectly washed, wiped, easy and hygienic to clean.

Getting mounting wall laminate

preparing a laminate mount on the wall, you need to do location.Carrying out the work begins only after two days exposure of the material at room temperature.Wet and damp stage works must be completed prior to the finish of the walls.Depending on the construction material may need wooden or plastic plugs for fastening the frame elements.

While walls that registration laminate techniques can be attributed to dry quickly and decorating, better indoor pre proshpaklevat and seal cracks and chips on the walls, etc.When installing frame crates, before putting the laminate on the wall, you need to ensure the verticality and the lack of curvature of the future surface.

For this test applies to construction level, length of 2-2.5 meters.In the desired location between the bar (or rack) and a wall should be enclose pieces of the board, providing the required level.Fastening rails to the wall can be performed on the screws screws.Using a screwdriver or an electric drill with a corresponding nozzle is much faster execution of operations.screw heads are recessed in the surface level of the bar.

Technique performance is mounted on the wall laminate, it differs little from doing similar work for the flooring.Just like on the floor, you need to pull the slats before exercise their final attachment to the crate.It is very convenient to use special metal plates with a flat hook for panel mounting.

They close dress hook on the groove edge and nailed to the elements of the frame, allowing you to pull right up next panel.The use of nailing, nailing inner groove edges to the wooden frame members uncomfortable that may damage the panel in the area of ​​the outer edges of the groove, or the head of a nail loose score and hamper thereby assembling the next lamella.

of the tools necessary for the work, can be called a hacksaw or jigsaw for wood, roulette, cable construction, plumb and level area.As well as a pencil or marker, a hammer, an ordinary screwdriver, knife or scissors construction.For fixing, as has been said, we need screws, nails, mounting rails, wooden or plastic plugs.To illustrate the process, how to lay laminate on the wall, a video is provided on our website.

instagram viewer