Finishing panels PVC in the interior living rooms

PVC panels in the interior should be qualitative

are made of plastic finishing panels of pure PVC, although sometimes they are made from recycled materials, it is no one hiding, and why, as recycling - it is right.Of course, the quality of the plastic sheet depends on what it's made, and from the manufacturer, and its reputation.

In general, there are decorative panels PVC quality, without impurities of other polymers, and poor quality, they are easily recognizable by the non-uniform texture, with small patches of color different from the main one.Figure of merit sheets of plastic wall coverings are:

• jumpers inside the panel, which is an empty space, divided into separate longitudinal channels ribs;the more of them the better.
• Compressive strength, which is very easy to check, with the force of pressing the sheet with your fingers;if the deformation is small, light deflection, then the material quality.
• resistance to bending, bending repeatedly checked at the castle bar in the corner;if the plastic is not broken, and the track of your checking almost invisible, feel free to take this material.

And now the poor quality cladding materials.The chalk is present, and if it is added too much filler in the composition of PVC products, wanting to save money on other components, PVC sheets obtained very fragile and when you try to bend them or squeeze easily crumble.

indication of poor quality and is pronounced seam when joining panels and clearly visible band on the ribs, and the overall geometry of the panel must be correct .In the presence of at least one PVC panel defect in the interior are long, and furnish them special is no different beauty.

Where PVC cladding panels can be used?

If to forget about the tradition of covering the walls with plastic only in the bathroom and toilet, you can go ahead and decorate it though not very noble, but very beautiful material living room, bedroom, library, office.No matter how many rooms may be in your home for each of them can come up with a special design at the heart of which will be facing panels PVC.

think that plastic out of place in a nursery or child's room, a teenager?We would recommend you to mirror panels of acrylic, they look really impressive, especially the so-called "holographic", with the effect of flicker, but the cost of their stunning - about $ 100 for a sheet size 124h246 cm.

If you bought a high-quality PVC cladding panel and the groove of each of them can be easily inserted into the lock the other, a smooth surface with almost invisible connection places you will be provided .And if you pick up eye-catching colors bedding, this finish may well take place in the living room, especially if you practice the zoning of the premises by covering the walls of different materials.

angle in which you can have a work area is located, it may well be faced with PVC, do not even have to do crate, take enough liquid nails and stick the panel directly to the wall.The bedroom is combined with tapestries and paintings of PVC will also look very good.On the balcony is best to perform the installation of PVC lining, it is designed for outdoor conditions, the PVC panels for the hall better to make vertical stripes of dark tones.

How attached finishing panels PVC?

about mounting adhesive PVC panels we mentioned earlier, but repeat in greater detail.So, as the experience of many masters, liquid nails are perfectly secure even over PVC tiles or plaster.If you have whitewashed walls, enough to wash out a wall a wet cloth (with hot water), and you can start their pasting.Positive aspects of pasting - not decrease the amount of space, especially when every centimeter counts, and wall covering does not bend when to lean against him.But the ceiling is better not polyvinyl chloride paste.

To increase the reliability of the lining when pasting the walls of the guides above and below can be additionally fixed with screws.

Another method that can be used to fix the finishing PVC panels on the walls and ceiling - mount it on a wooden crate, or special aluminum profiles.Recent fastened to the walls on the screws, and by it, depending on the material, our plastic batten mounted wall covering.

For wood are ideal, or screws, or clamps, for the profile - only screws.For ceiling mounting as PVC sheets it is recommended exclusively crate.Guides located near the floor and the ceiling, skirting boards can play a role, the panel in this case, will be installed vertically, for horizontal arrangement of panels mounted rails in the corners of the room.