Build Daily

Accomplishment

August 12, 2017 18:07

Homemade or forged plank bridges - which is better ?

click fraud protection

Forged bridges - if there is extra money

blacksmith work has always been highly valued, especially when it came to the manufacture of new things.That is why in the old days the villagers tried to attribute farrier to repair old metal tools, and new ones were forced to order, when there was no other choice.Today, the original wrought-iron products, such as lattice fences, gates, and foundations for bridges, are quite expensive in comparison with cast or stamped.

Metal railing of intertwining plants or curving in a fight dragons - which only masterpieces do not come out from under the hammer in the hands of masters.Twisted columns poles, too, can become a good frame for a particular painting, executed in metal. However, it should be borne in mind that, being thrown over the water obstacle, this bridge will be quickly rust under continuous exposure to moisture .A colored forging looks not so spectacular.In this regard, the least vulnerable to the flooring, which in any case is made of wood.

Also keep in mind that the landscape design requires integrity processing site.That is, if among the flower beds located arbor of metal parts, clearly wearing handmade tracks, you'll have the rest of the elements of the garden is decorated in the same style.That means no matter what the cost to put forged bridges, benches, lamp stand.An alternative could be mixed styles, when wooden structures contain metal parts.This option will allow you to do the same with their own hands the bridge.

How to make a wooden bridge with his hands

If you do not feel the makings of a blacksmith, better pay attention to the tree, it is easy to process, even in unskilled hands of a child.Almost every country site owner can find the farm a few boards, a pair of beams or logs, and more to construct a wooden bridge with his own hands, is not required.Is that a stock of screws can not hurt.When you are ready, start the preparatory work, namely - measurement.It is necessary to know the distance between the areas of solid ground on both sides, as well as take into account the possible flood.If the high shore, make sure that they never spoofing, and there is no danger in the future.

At the slightest hint of insecurity off the coast, they should be strengthened or natural stone, held together by concrete or wood, for example, by installing panels of thin logs or slabs, reinforced piles driven into the bottom .Now you can go directly to the base of the bridge.If the width of the water channel or gully allows, you can just throw on a floor of packed logs of timber or timber plank crossbars.By the same bearing elements fastened and railing rack.But if the river is too wide, it is necessary to drive into the bottom of the support.In this case it is best to use a thick pile or timber, and if there is an opportunity and a metal pipe.

latter option will allow you to weld on the metal support frame, which in the future it will be possible to strengthen the wood flooring with a handrail.By the way, using a frame with a mesh, you can even make the most authentic marble bridge.Of course, it is impossible to throw from one bank to the stone slab (it is necessary to find a more suitable size), but pour the foundation concrete and strengthen it in pieces of broken marble, if possible, without gaps - it is possible.

Decorative wooden bridges to give - simple solutions

How easiest to build a crossing over the very short distance, that is more decorative than necessary?What could be simpler?It's enough to have a curved beam (can even be a tree trunk) or a curved beam arc, in fact, culled timber.We put our future bridge bend down and at the ends of nailing half-meter thick trim boards.The log will have to pull up slightly, making the shelf under the board.Now, if you turn our humpbacked skeleton of the bridge, it will bend the arc, keeping on solid supports.If

to strengthen the flooring you use screws, preferably lightly bore the upper part of the holes for them, if the nails, hammer them so that the cap completely drowned in the wood.

If the foundation beams to be used, then right at the top of his plane fasten screws wide boards.For more decoration can not withstand even the most identical of their length.If we have to throw a log abate its top, so that the plane turned.Racks railing trying to drive into the ground on both sides at the ends of the bridge (in the same place doing the small mound, picking up a track), as the bar take a curved pole, trying to guess with a radius so that he repeated bending of the deck.Such miniature wooden bridges to give can be spanned not only in streams and ditches, but also over the flower beds and ridges.

instagram viewer

Categories

Latest Blog Post