Ordinary things in a new way , or how to make colored glass yourself ?

What you should know before starting work

Before you paint the glass, it should be washed well with soap and water and successively washed with warm and hot water.Work is carried out with standard painting tools: roller, flange and ball of foam.In some cases, using end bristle brush.The paint should have the consistency of sour cream and apply a thin layer.

work done on glass lying horizontally, as this will prevent smudges.If possible remove the glass is not, in a vertical color to do the horizontal motion, starting from the top and gradually going down to the bottom.Decorative painting is done on the glass two millimeters thick.Next on the drawing glued glass of the same size and thickness.

Then they installed and secured.If you wish, you can make a pencil «collotype» decorative motifs.It is also often performed stained when each individual piece is inserted into the lead frame.Special pencil you can draw the crack for aged effect. Note!Run work can be absolutely any color by mixing different colors.

Preparation dye composition

To make colored glass with your hands, you need to cook a variety of paint colors.Consider the most popular ones:

• To prepare the white paint you will need: 80 grams of silicate glue and 20 grams of kaolin.Preparing it as follows: kaolin is ground and thoroughly mixes with the adhesive.To apply the ready mix, use a pointed stick or artistic feathers.
• Ingredients for black: 60 grams of silicate glue, 20 grams of black printing, 20 grams of charcoal.All the ingredients are well mixed in a porcelain container and finished mixture is filtered.
• etched paint.This material is characterized in that penetrates deep into the glass, so remove it will be impossible.Considering this factor, caution is required when applying the solution.Ingredients of the composition: 50 milliliters of distilled water, 1.5 grams of zinc chloride, 6.5 gram of hydrochloric acid.The second composition will need: 8 grams of sodium fluoride, 35 milliliters of distilled water, 0.7 grams of potassium sulfur.Both solutions are prepared separately and mixed before painting begins glass.

Note!Working with etched paint raschertite advance on the glass all the pictures that have been minimal spades.

In addition, it is possible to make red glass, glass blue and any other color.For such ink composition is as follows: vinegar, water-resistant varnish, water, a colorant, gelatine.All the ingredients are mixed to a thick mass.

Glass color - to comprehend the basics of the process

Stained glass is best done with an electric or pneumatic gun.In this case, the composition evenly without streaks and covers the entire surface to be treated.If such devices are not, you can use a brush, roller or a foam pad.If the neighborhood has a window that will not give in to treatment, they must be pasted masking tape.

When you first try to make a multi-colored glass, it is better to start to practice on rough material, so as not to spoil the work.Apply a mixture of one layer of 80-120 microns thick.However, if you think one layer is not enough, you can apply a second.To do this, be sure the first coat must be completely dry.Remove layers of paint in the event of unsatisfactory performance may be the first 4-6 hours.

Tip! To improve the quality of the coating can be used infrared drying.