Installation of radiators with their own hands , preparation , installation , video

matter of replacing pipes and radiators in the water and heating systems has been an increasing number of homeowners.This is especially significant for the residents of apartment buildings, and on it there are objective reasons.Firstly, a strong deterioration of housing facilities.Even at the highest level have been paying special attention to the housing sector.Secondly, the need to install individual meters metering.

Naturally, the installation of meters or replace rotten pipes utilities preference for plastic or PVC Pipes.They mounted and is much easier and faster, and they last much longer than traditional metal.Well, if the replacement is part of the pipeline, the question naturally arises, and the replacement radiator.

Familiar cast iron batteries in many homes "their" already worked for us.Given the well-known to all of us the quality of the water used in heating systems, it is clear that these batteries for a long time need for high-quality cleaning interior surfaces.But how such cleaning is effective and justified?Plus the look of cast iron radiators are not always "fit" into the overall design of modern apartment.

Therefore, many owners of apartments and private homes prefer to replace cast iron radiators to the more contemporary models.And the question arises, how to install new radiators?Can you do it with your hands, or need to call the professionals (and, of course, pay)?Let's face it.

This happens quite often.After all, no one is safe from the fact that the cast-iron battery "flowed" in the heating season.If so, it will have to negotiate with the neighbors (they also have a little bit frostbitten), with a mechanic and valve cover.Therefore, a prudent owner such work plans for the summer.

Preparing for replacement radiators

Any job, no matter what sphere of human activity is not concerned, it requires some training.

First, you must decide what kind of radiators should be purchased.Manufacturers offer a lot of different models.It is necessary to choose the best option: battery type (steel, bimetal, etc.), its power.

Secondly, it is necessary to think about the various components that may be required (valves, fittings).Consumables too, should be prepared (FUM tape, for example).Plus, the appropriate tool.It should be understood that if the radiators are changing during the heating season, that such work should be completed as quickly as possible.If the owner does not hurry, his "hurry" neighbors.

return to the question about the neighbors.Talking with them is necessary not only to disconnect the supply of heat, and in summer it is not necessary.The fact is that the best option - to replace the radiator and pipe runs.If you convince the neighbors that we spend at its own expense a new plastic pipe right before the radiator (downstairs and upstairs), it is not necessary to cut the existing metal pipe in his apartment.This extra work.

When all organizational issues have been resolved, you should make the necessary measurements.pipe length, the number of connections, bends (corners need to be), etc.We need to see what the neighbors radiators and choose for them the necessary connections.Therefore it is necessary to create a diagram showing all the details of the route and the size (length, diameter) - I have already talked about it, you can read.It will help the seller in the store to pick up everything you need.

Installing radiators

1. marking places for installation of radiators and installation of fasteners.
2. Take into account that radiators should be installed at certain distances:
   - from the floor - not less than 10 cm:
   - off the wall - not less than 5 cm This is dictated by the need to ensure good air circulation and ease of cleaning in the room;.
3. radiator assembly (installation of plugs, gaskets, tees, etc.).It all depends on what scheme decided to connect radiators;
4. slab gate valves in the system;
5. installation of new equipment.It is to install adapters on the neighbors radiators, pipe pulling, their connection.Installation of all components (valves, fittings, etc.);
6. opening valves and check the replaced system components for leaks.