Plaster cam boards - technical features and dimensions

cam boards are widely used for interior decoration - they are sheathed walls, are easily and quickly assembled interior partitions.Plates can be used for exterior decoration of surfaces.In fact, they are a good alternative to the usual already plasterboard.The basis of such plates is still the same cast.Special additives prolong the service life of the building material and give it strength.

pazogrebnevyh main difference from the sheet of drywall panels is that their end faces a groove is made, which reduces assembly time and construction increases the density of the individual compound plates.It is because of this plate groove and called pazogrebnevyh.The grooves may be either trapezoidal shape (in diameter), or rectangular.gazogrebnevye plates are of two types: water-resistant (repellent) and conventional.Also plates (GWP) is available in two versions - solid and hollow.Full-bodied

plate more solid, but hollow plate is easier to install (their weight is less than a quarter) and are able to provide better sound insulation of the room.Mounting plates made ordinary bonding, which allows to perform all works quickly and without concomitant debris.Suitable mounting plates in two layers, which increases the strength of the walls.The use of such plates allows not to carry out such work as plastering surface.

General characteristics

• material is not afraid of moisture and does not rot;
• environmental friendliness, since technology does not contain hazardous additives;
• GWP incombustible;therefore, recommended for use in fire-hazardous areas;
• plates are a good insulator because it does not conduct electricity.

Specifications

• insulation about 44 dB
• panel thickness 80 mm
• With the construction of the double partitions recommended thickness of the air gap
• 40mm
• sizes GWP 667 x 500 mm

When installing the HPD should be noted thatplate should be uniform.Constructions of this material is much less space.It does not require the organization of additional reinforcement of apertures, if the width is not more than 90 cm, which greatly simplifies the work.

Due to the fact that the plates have a fixed size, there is no need for careful measurements and calculations.Installation GWP easily performs even the expert.