Washing machine beats the current : the causes , what to do

Appliances that perform a significant part of domestic work became for us so commonplace that we sometimes forget that the vacuum cleaners, stoves, washing machines and dishwashers - is a complex technique that requires propercirculation.Remembering about the safety rules we often only when one of our au pairs starts to behave strangely, for example, hitting electrocution.

In this article, we want to tell you why it happens with this type of home appliances, like washing machines: because of what you can get a shock and what measures should be taken tothis will no longer happen?

reasons for which stiralka starts accumulating electricity and share it with their families, there may be several.Sometimes they are harmless and do not threaten to serious consequences, but often those reasons should be immediately eliminated to avoid further trouble.Consider the most common cases.

Where electrical wiring in an apartment is very important not to forget about the grounding element.Earthing is needed to set home appliances do not accumulate electricity.The solution is the only way - to connect the ground at least in the room, which houses a washing machine.

device This reason relates to the internal as directly related to the malfunction of the washing machine.Diagnostic devices can be carried out independently: removing the panel, under which lies the control unit, and verifying the integrity of the wires.If the damage is not very serious, it can be repaired with tape Heat-or.

electric shock can also cause malfunction of important elements of the mechanism, such as a motor or heater.To identify the problem areas, you need to disassemble the unit and carry out a thorough visual inspection of all its parts.In some cases, unable to repair the faulty part, but more often it has to be replaced.

Here are a couple of the most actionable recommendations that provide electricians and repairmen of household appliances to those who faced the problem of generating a current washing machine.

• Replace the electrical wiring in the apartment of a residual current device: when voltage drops, it will help to prevent a short circuit, blocking the flow of electricity.
• Make sure to supply the wiring system of equalization of potentials.It is necessary to reset the difference between the potentials of the conductors of electric current.The apartment such conductors are electrical and communications components.Balance the potentials, we significantly lower the risk of electric shock.

Most often, washing machine begins to beat the electric current due to the fact that there is no wiring or grounding element is connected incorrectly.

Here is a brief guide on the ground connection to the washing machine:

• When installing electrical outlet that is connected to a washing machine, connect it to the three-wire cable, carried out by a switch board.
• This should be a separate tire fitted for the land and for zero.
• Connect conductors: phase - to the machine, zero - to the first bus, the ground - to the second.

• Quite often ordinary people solve the problem of the absence of grounding, a sub-genres under the washing machine rubber mat.You should know that it is - a temporary measure, which does not guarantee full security.
• Another fairly common way to deal with the accumulation of power - it is off the network appliance filter.So you can only reduce the force of the discharge, but from the shock will not save.
• Use as a kind of earthing conductor, conducted by stiralki to any metal element, such as a radiator.To do this in any case not worth it - because the risk of exposure to an electric current to the man only rises.

• The washing machine must be as far away from plumbing fixtures to it did not get a drop of water.The socket to which it is connected, have to be waterproof.
• Experts advise not to leave stiralku constantly connected to the network.Unplug it immediately after washing is complete and include only after loaded linen and covered with laundry detergent.