Infrared Heated floor - not a luxury but a necessity

What conclusions can be drawn?

In fact: infrared light is similar to normal light, it creates light.The only difference is that the infrared heat waves are absorbed, becoming heat energy.But in the space at this time is almost no energy loss.For the most natural and the most perfect method of heating is considered to be this one.

Despite the fact that infrared light was discovered in the early 19th century, the active use of it in everyday life became popular just now.Infrared heating is considered to be fairly new, perspective view of the heating.It is inherent in many advantages over classical heating methods.

They attract attention with its economical and practical to use and install.You may not need a qualified service and repair, as it has a long life, and this bypasses the majority of competitors.Such a method promotes the heat transfer surfaces of heat and prevents heating of the air, as it happens in the case of the convection heating.

Infrared heat will save

high prices and the restriction limits among energy have led to the fact that economic heating has become relevant in the application in the present tense.Therefore, all those who wish to save money, it is recommended to think about the cost of heat.Most suitable for this are companies and organizations that provide care to its various facilities (factories, gymnasiums, warehouses, garage space).

As has been repeatedly stated, heaters are very economical and practical.By heating the floors, walls, furniture remain in the area, as opposed to air, as in convection heating, ensure the absence of drafts and dust spread through the ceiling.

Infrared heating is also called teplovolnovym, radiant and long-wave.

It is understood that heating the converter operates so that it becomes warm first air that heats only human.Converter currents move warm air upward, and the cold is at the bottom.Thus, the most suitable in the temperature range, but very inconvenient for the life of a ceiling space.

While thermal energy from infrared heater is not in contact with air, and directly reaches the people and objects that are within range.Minimized heat accumulation near the ceiling, and the energy is saved by 40% more than the similar heating convector.

Important!The only heating that can carry out a local heating of the working places, it is infrared heating.It is regulated as regards temperatures in different zones.This is achieved through the placement of individual devices with a comparable distance from each other without full space heating.

These heaters can instantly submit subjects warmth, because eliminating the need to pre-prepare the room for the arrival of guests, the heat will go instantly, on the contrary, it is possible to reduce the temperature in accordance with the time of day and limit energy consumption (night, dinner, holidays, weekends).

bare feet on the warm tracks

main parameters of infrared heat-insulated floor:

• size.Thickness - 0.3 - 0.4 mm, width - 0, 5 - 0, 8 m
• Power -. 140 - 150 watts per square meter.
• Power - standard grid.
• Temperature - 55 ° C. The melting of the film - at 210 ° C.
• heating element - graphite.

Paul presented ultrathin polymer film that transmits infrared rays of up to 20 microns in length.Black graphite strip heating element are fed over conductors 220 W power, they are sealed in the polyester film.Electromagnetic radiation from this type of heating is much lower analog.This reduces energy consumption and quality improves efficiency.

So, connecting the floor to the mains via the thermostat, floor cloth starts to warm up and radiate the heat of sunlight.

This ensures that all non-transparent objects are heated and the room becomes a necessary degree of temperature.It should again be generalized that it heats the heating people and objects in range, but not all of the air in the room, and it can reduce energy consumption and thus the cost of it.