Spray gun for water-based paints - if you can get along with other tools ?

Spray for latex paint - why should he?

Orchard latex paint is specially made taking into account the peculiarities of a given composition.It features high performance, large spray surface, and ease of use.When working with water-based paint has its own characteristics, focusing on that, and the sprayer has been developed.

use devices is necessary for several reasons.Firstly, latex paint dries very quickly.Complete drying comes in 1.5-2 hours, and partial - in five minutes.Therefore, to work with her usual tools uncomfortable.Spray composition takes the same low pressure, so that partial drying it ceases to be a problem.Secondly, such a mixture is almost does not spread, so the brushes can remain on the drawings on the surface, which is unacceptable for painting.Using a nebulizer, layers can be applied uniformly, without the formation of images.

Tip!Despite the fact that very good sprayer sprays the composition, yet optimally cover the surface in two layers.

Types sprayer

So, knowing that such a spray gun for water-based paint, how to choose the best option?The first thing you should know there are three types of sprayer: manual, electric and pneumatic.The first option - it is the cheapest and easiest device.It should be selected in those cases, if you need to spend some one-time job and then use it from time to time.It is also perfect for repair their own hands, because it can be used to spray chalk and lime solutions, that is, to make whitewash.Its capacity is 200-225 square meters per hour.

second type, the electric, the most widespread among the newcomers, who for the first time faced with such a tool.This is due to the fact that it works on the mains and does not require any additional equipment.This greatly simplifies the work, so for home repair is a very good option.

latter type - a pneumatic device.He is considered a professional and is rarely used in household repairs.It is used for its operation, compressed air that is fed from the compressor.What is necessary to use an additional compressor, making it advantageous only for bulk and large-scale works.

Note!Pneumatic unit can work with almost any structures.

How to choose a replacement sprayer?

Spray for latex paint is a priority method for applying the composition, but not the only one.You can also use a roller for water-based paints.By selecting it, you should pay attention to the following features:

• Weight tool.If the roller is too heavy, then by long-term work with it you will get tired quickly, which will lead to lower efficiency of work;
• Roller should be with a light nap, because it is short.If the pile is long, it will always remain in the paint, and it will have to pull out;
• on roll seams should not be, as in rolling on the surface will remain on his band, after the aqueous emulsion composition, as already mentioned, little is fluid;
• convenient handle.This factor also affects the duration and comfort of work.

Tip! better spent and buy a good tool that will provide you with high-quality and pleasant work.