Dismantling of tiles - get rid of excess without the noise and dust

it possible to remove without damaging the tile?

If you have decided to still keep the elements of decoration, it is necessary to determine the way in which it was placed and what was fixed.If it was attached with cement mortar, without the punch, bump stop and the hammer can not do.Remains are unlikely to be re-applied.When used as a fastener other materials require much less effort.Remove old tiles will help you some tips from "experienced" builders.

As mentioned above, tile, planted in the cement slurry for re-consumption will not go, because of its unfitness.And if the old tile is not for you interest, special care is not required during its dismantling.If you wish to use it again, you will need to make some effort.

tools that may be useful to carry out the dismantling of floor tiles, as well as any other - a hammer and chisel.Dismantling the equipment itself through the baffle plate or the punch is not to get in the tile, and under it, at 2-3 cm from the edge.

What we need to do?

How to remove the tiles from the wall, can advise builders who are good professionals in this business.Not keeping the tiles, you can work a jackhammer or a puncher, anticipating a lot of noise and dust around the cement.Masters do so qualitatively mount finishing material to the substrate that accurate separation of each tile from the wall is practically impossible.And it is better to remove all at once and without mercy, without wasting time in vain.

In this case, the wall will receive a severe damage that will have to gently smooth out to qualitatively prepare it for installation of new materials.

How to remove the tiles from the floor, especially if the ceramic tiles glued with special glue?This requires a more gentle dismantling regime.It is necessary to perform the following procedures:

• release the joints between the tiles on the grout;
• prepare knife, trowel, chisel and water to wet the grouting.

Removing old tiles - will act in what order?

tile space filled with grout, moistened with water and gently remove it.After the grout is removed, it is necessary in this place to bring assistant tool with a sharp edge and start pounding it with a hammer with caution as long as the tile begins to detach from the wall.The separated element is washed with water from the old glue and fold gently to avoid damage to its reuse.

The question is how to remove the old tiles from the floor, can be solved in the same manner, but using already other suitable tool.To do this, you need a thick steel wire (two-piece), you want to bend in the form of hooks.These hooks are fed under the tiles and gently pull toward you.

Sometimes there is a need for dismantling of separate fragments, eg damaged.This problem is characteristic for bathrooms.How to remove the tiles in the bathroom when suddenly cracks or chips?A similar problem can arise if the errors were made during installation finishes - it can be left the old paint, poor wall ribbed for better contact with the surface.

Work on dismantling the individual tiles is almost jewelry character, as is a serious problem of preservation of adjacent tiles intact.It is necessary to first remove the grout joints between the compounds, and then draw a tile on the diagonal and a thin drill to make some holes, starting with a central crossing point for loosening.Then, using a chisel and a hammer, remove the remaining pieces.

If you are thinking how to remove the ceiling tile, then there is a solution and then, especially when you consider that it is usually made of soft materials such as foam.All you need is a spatula and warm water, and, of course, protect themselves from furniture and upcoming mud, as have a lot of scouring.Tile itself well to hook a spatula and removed, and if you do not need to keep it intact, it is possible to break off pieces.

The ceiling still remains the glue after you remove all the tiles.It can only scrape, sometimes soaking water if the paste becomes softer from its impact.The work is not technically difficult, therefore, to cope with it quickly.Then there is only the occasional seal the chips that you may have made inadvertently and start a new finish.When installing suspended ceilings cosmetic restoration can not do at all.