Gypsum boards for interior decoration

Application material

plates used for interior curtain walls in buildings and build walls, as they are ideally suited for the installation of interior partitions.They are very popular due to the ease of installation and, of course, because of the huge degree of moisture resistance and environmental friendliness.These products are used for cladding, acting as additional protection.

gypsum boards used in construction and repair work in areas with different area and destination.They are the perfect combination of optimum cost and high quality.The material can be used for the construction of curtain walls in buildings with high humidity levels, and, in contrast to the foam blocks, gypsum boards have a higher sound insulation and fire-resistant characteristics.

Important!Buying plate, it is necessary to take into account the humidity and temperature changes in the room.

erection of partitions of the plates

partitions of gypsum boards are manufactured with a thickness of 50 to 75 mm, length - from 800 to 1500 mm, width - from 300 to 500 mm.All edges are made only to certain slots or a tongue and groove.Slabs cast from a dry blend of gypsum with added to it a filler - dust, slag, etc. chopped resinGrain slag must have a diameter greater than 25 mm.

example, in casting using 4 parts, and 1 part of the slag gypsum.A mixture of such materials and shuts mixed with water to a certain thickness.On the bench are fixed rails required thickness with grooves and ridges, making them the form and bonding.To avoid sticking of the solution to lubricate the rails of the emulsion (usually a soap) or grease.

The form is filled in previously cooked weight and slim fit Lucina along the plate and wide.Weight leveled, then it must grab and take a stronger state.Then rails are withdrawn, and the finished product is disconnected from the fabric and set to dry.

With direct installation of partitions are used dry and wet plate.To provide greater strength in the horizontal grooves partitions installed steel bars coated with varnish, or wood splinters certain value.After this partition smeared or processed by another protective layer.

Important!Care must be taken to make measurements of plates required for the erection of walls.

Using material as the decorative elements

plaster decorative plates are often used for finishing the interior of the walls and ceiling.During the production of products used gypsum cement, to which may be added:

• aggregates;
• special dyes.

To improve the strength of the product is reinforced with galvanized metal, glass or other material.When checking bending all plates can withstand the enormous strain.

front side decorative panels can be painted or not painted, with relief patterns or completely smooth.For the hydrophobic properties of the front surface of it is treated with a special waterproofing compounds.For fastening material the same methods are used as for conventional gypsum boards.

As a binder for decorative panels can be used phosphogypsum.When choosing tiles as a decoration item, make sure the appropriate style of drawing and color that prevails on the surface of the plate.