Tile under a stone for interior decoration as an example of identity

tile under a stone for interior decoration will transform the room

And those who are kind to nature by any means trying to save trees, and lovers of unusual design, or even just those who are practical - all prefer natural stone and his skillfulimitations.And, often under the stone tiles for interior decoration is even more popular because of its cost is incomparably lower and the strength and durability are very high.

For example, do you think, if in the same difficult conditions, being constantly exposed to the influence of moisture and temperature jumps, will be wild stone and artificial copy of which will hand over the position before?Do not worry, it will not be a man-made material.

when placing it on the floor tiles, imitating marble or other breed, you create the illusion of a stone, but it does not mean that later you will feel it is constantly cold .Made from concrete, artificial materials are somewhat warmer than natural, and in accordance with modern floor laying techniques can provide high quality thermal insulation and at the same time to get a nice decorative flooring.

Imitation slate in the kitchen or in the living room tuff give you the opportunity to decorate the room, even with a minimalist interior and give it respectability.And it should be borne in mind that under a stone tile floors are not afraid of household chemicals, and care is extremely simple, and therefore, to maintain cleanliness in the rooms with a finish is not difficult.

tile under a stone wall, and its advantage over other materials

advantage of forgery under the rock in front of the original, we have already found out, and now it remains only to find out if this stuff is good in comparison with other types of finishes.For a start, we will be compared tiling stone wall and timber.What can not be denied the wood, so it is the warmth and beauty of its structure, there is an imitation of a stone inferior bunk, and other types of wood panels.

But all the other characteristics such as strength, moisture resistance, durability, frost resistance - certainly much higher in artificial stone tiles.This is especially true resistance to moisture, because, as you know, the tree tend to crack after a heavy infiltration of water, followed by rapid drying.

The same material can be combined stone and wood, if you buy a custom tile that mimics the petrified wood.

different picture is formed, when compared will wall tiles under the stone and plastic panels.In terms of aesthetics, both the material worthy of decorating a room, but the artificial stone tile ennoble the room, while the same plastic linings only emphasize the effort to save on finishing.

Further, if the strike hard on the tile that mimics granite, it is unlikely that it will be at least a crack in the plastic as soon as is clearly visible traces of mechanical action.Only exposure to moisture plastic can withstand for a long time, though not as much as a stone, even artificial.By the way, that the damp tiles under the stone fades - no more than a myth, the colors on the contrary become more saturated in contact with water.

Floor tile under a stone - manufacture equipment and packing

Gres, which, in fact, is any imitation of rocks, it is easy to make at home, especially if it's tile floor under a rock (or wall) forfacing rooms.The technique is simple, and you need to work only a drill with paddle for mixing of solutions, a pair of buckets, pallet, any scale and, of course, the forms that you can buy some companies, they are usually made of flexible polyurethane.

Take cement and filler (sand, fine marble or granite chips), well we mix them in a bucket, in the proportions used for maximum strength, of about 1: 3 or 1: 4.In the second bucket of water, knead with a plasticizer and pigments, and then pour the resulting composition into the first bucket.Take a drill with paddle and mix everything well.

The resulting solution was poured into the mold, pre-lubricated with soap powder diluted in water to make it easier to extract the finished product.Slightly shaken each mold with the mixture to release any air bubbles, if any were in the depths of the masses, then spread with a spatula solution.

At the end of the day gently turn down one of the walls of the mold, picks up the finished tile and put it on the edge dosyhat, repeat the operation with all units of our products.When the material is dry finishing, the walls are treated to a perfect smoothness, they are applied to the adhesive layer up to 4 mm, which is laid in neat rows tiles artificial stone , wall fixing which is provided by a deep indentation in the adhesive mass.

to adhesion was better, the surface of the wall and the back side of the tiles can be primed .Next, rub clean seams special blend, and if we want to get the effect of wet stone, cover with clear acrylic lacquer trim.