Primers special purpose 3 - in-1 for rust and deep penetration

Priming enamel 3-in-1 Metal and rust

Such a mixture is much more rarely used for primary treatment of a holistic, untouched by metal corrosion.Its advantage - in a quick and high-quality processing of rust so that the product look attractive again and stopped to crumble.

primer composition 3-in-1 rust

wide set of properties is determined by carefully crafted composition.Priming mixture of 3-in-1 contains:

• synthetic resin;
• organic solvent based;
• «rzhavoed";
• corrosion inhibitors;
• additional components that make up the enamel properties.

Purpose Soil 3-in-1 Metal and rust

Priming enamel 3-in-1 allows to avoid the mass of metal processing steps, which before its appearance was compulsory.Before finishing no longer need to work on labor-intensive mechanical removal of rust, but after priming is not necessary to apply the decorative layer.All of these tasks takes the part, in fact, brings together a paste of three finishing material:

• chemical corrosion converter;
• primer having anti-corrosion properties;
• decorative enamel.

Using this primer, we can quickly and efficiently process the large steel structures, surface with traces of corrosion thickness of no more than 1/10 mm, construction of indoor and outdoor products, ferrous metals and certain kinds of nonferrous metal (aluminum, zinc, copper).

Properties primer 3-in-1

Unlike conventional paint or primer, which is poorly cope with the prevention of corrosion by applying priming enamel of this type can be confident in the durability of finishes.The formation of rust products under the polymer layer is reduced so that the paint successfully serve the entire allotted time.

is responsible for this set of properties:

• ability to replace three of finishing material;
• the possibility of finishing the work, without having to remove the corrosion layer;
• weather and moisture resistance;
• resistance to harmful environment (salts, gentle acid and alkaline solutions, mineral oils);
• fast drying;
• elasticity and thermal resistance (admissible fluctuations -45 - 100 ° C);
• opportunity painting in sub-zero performance down to -10 ° C.

Priming enamel at the same time economical and convenient for application.Furthermore, high performance paints require very little material consumption composition.

Instructions for use of priming enamel 3-in-1 rust

work with ground-enamel is quite simple.To put it in several ways: by brush, roller, spray or dip - and used as a primer for metal and rust, or as a painting material.

first steps - preparing the surface - are the same for both options:

1. Remove dirt and rubbish from construction.
2. Removal shall be exfoliated old paint flaking rust.
3. Make sure that the surface has no traces of fat or condensate.If necessary, dry and degrease.
4. For application on old paint check its compatibility with the help of the test, if the information about the material did not survive.To do this, apply a coat of primer on the part of the structure, and wait half an hour.If the material is not swelled during this time, it is possible to process the entire surface.

Application priming enamel 3-in-1 as a primer

In this case, the single layer is enough even application of the composition of any of the above methods.Well combined with material oil, Phenol, Water-dispersion paints and polyvinyl.

Note!Do not use nitrocellulose compositions - bulges to paint!

Application priming enamel 3-in-1 in the usual way

For this purpose, applied from one to three layers of priming enamel, depending on the purpose and desired outcome.You can work in any of these ways, causing the paint:

• "wet on wet" technique: drying of layers does not exceed half an hour;
• usual way, when any next layer is applied after drying the previous one.

time the final drying of paint applied in several layers, with different conditions ranging from a few days to a week.

Primer deep penetration

This type of soil - a real resuscitation for weak surfaces prior to finishing.With its help, you do not need to remove the old layer of plaster, putty or wood before painting or gluing wallpaper.

Composition acrylic primer deep penetration

emulsion may have additional properties, from which its components are subject to change, but there are basic components:

• suspension of polymer acrylic;
• water;
• emollients;
• thinning modifiers.

This primer deep penetration always have a high content of adhesive components, which explains their properties.

Specifications and features deep penetration ground

main characteristics of acrylic compounds are reduced to fulfill the main task - strengthening the foundations for finishing:

• penetration depth depending on the quality of the primer varies from 5 to 10 mm;
• time completely dry primer almost any brand is about a day when 20 ° C temperature and the humidity does not exceed 60% - in other indicators period can vary;
• work with the deep penetration can primer at 5 to 10 ° C;
• has a white, clear or light gray;
• ground operation is possible at temperatures of -40 - 60 ° C;
• are not toxic, explosive and flammable substance.

This set of quality deep penetration primer:

• quickly and deeply permeates the surface;
• binds particles of the base material to each other;
• creates on the surface of a thin flexible film that prevents destruction of the base and reduces the cost of finishing finishing material;
• enhances adhesion;
• evens the surface;
• may have antiseptic and anti-fungal properties.

Instructions for use Deep penetration primer

The paper material is simple, so the problems with its application will not have even one who is trying to force the first time to repair.Follow the basic steps:

1. Prepare the application surface, clean it from dirt, old finish, treat grease stains.
2. exfoliated and breakaway parts must be removed mechanically.
3. possible, concrete and plastered surfaces grind for deeper penetration into the pores of the soil material.
4. Apply the primer with a brush, roller or spray as evenly as possible over the entire surface.
   

   Note!For friable or rough surfaces may require two layers of material.Before applying the second layer should be at least an hour.

5. Proceed with further finishing room no earlier than one day.

correct application of deep penetrating primer creates the appearance of a wet and lacquered surface.It will greatly facilitate future work, reduce the consumption of the following materials and prolong the life of finishes.