How to use the gun sealant or learn a new tool

How does the gun sealant?

sealant gun is a tool for a variety of construction and repair, call it so because of the principle of its operation.After all, part of it is released by the trigger, here and there the first association that this gun.However, it is a little wrong, the supply of the material is carried by the piston, which is actuated thereby trigger, so more accurately call it - a syringe for a sealant.

But all this linguistic detail, this tool has a lot of advantages especially for the builder.Use it to seal small gaps and inaccessible, and to do it quickly, and therefore work more enjoyable, and much time is saved.

thickness of the extruded sausages can be set even before use, because the sealant cartridge has a spout with labels on which to cut this very nose, thus opening it.

Buying yourself this device, you will be surprised the variety of tools and guns are used not only for working with sealant.Selection should be done on the basis of the planned work, but do not chase the functionality and the brands, there are quite budget friendly options that are suitable for all occasions.The main thing that

weight it was small, and it will be tired arm, and check the ergonomics (just take in your hand, it should be easy to press the trigger) and stiffness body.

How to insert into the gun sealant?

Sealant guns are sold in special cartridges, usually their form and dimensions of the standard, so they are suitable for the majority of syringes.Many look to the tool and the cartridge, and found no connection, as inserted into the sealant gun.But do not worry, this process is mastered in minutes.Let's go in order.

1. First drawn metal pin .If you pull it, it will not be in a hurry to leave, because it keeps the latch in the form of the lever (with the spring plate).Here is the rear lever is pressed against the handle, then the pin easy reach.
2. In the resulting space cartridge is inserted, if you have no idea how to do this, take the gun sealant, guide him to tell everything step by step, if you're lucky, even in pictures.
3. usually cut off the tip of the cartridge on the label of the desired diameter, this spout tube is inserted into the front opening gun
4. now need to catch back again pressed to handle, if you let him go, and reinsert the piston , they pierced the cartridge.Push it needs to stop now the tool is ready for use.

How does the gun sealant?

Surely, one type of this device is enough to understand how the gun sealant.By pressing the trigger, the alleged shooting, you activate the plunger (piston), which pushes the sausage evenly the desired thickness, and it is fixed, so hard to overdo it, if you just do not stop dreaming and do not move the tool at all.

As the use of sealant is necessary to adjust the piston, opening again rear latch.Some devices are spared from this, the piston moves himself under pressure.

After working syringe sealant should be cleaned and remove the used print cartridge from the device.Washed and dried gun will patiently wait for the next operation.