Laying of foam blocks : features and subtleties of technology

What determines the cost of laying the foam block

every consumer serious about planning your budget, you need to know what determines the price of paving blocks, and what it could be (at least approximately).And it is quite natural, because only by knowing the value of all the materials used in the construction process, as well as working with them, you can write a good estimate of the future project.

note that the price of packing foam blocks, in general, is about 1500 rubles per 1 m3.This is an average value that can vary depending on the pricing policy of a specialized company, which addressed the consumer.As well as the price per cubic meter depends on the type, size and density of the foam block.For the specifics of working with different types of materials may differ, which, of course, will affect the value.

If we talk about the cost of the works in the volume of the entire structure, it is important to note that it will be determined by the following parameters:

• complexity of work;
• their volume;
• tentative construction schedule;
• specifics of additional services;
• features pricing policy of the company to which you have applied.

That is, provided a balanced and rational approach, the consumer may well ensure that the price for the work it has been expensive.Therefore, if you are not sure that they are able to cope with the solution of the problem on their own, it is better to consult specialist services - the cost of work in this case is guaranteed to be less than the costs that you would incur if a mistake.

foam blocks stacking technology in the instructions and video

If you have decided that the price for the work of laying the foam blocks is too high, you can try to do it yourself.Just do not forget to follow certain rules, act competently and in good faith - it will achieve the best results.

To get started, you need to look at how the foam block should be laying on the glue in the video, and then repeat the procedure.Of course, instead of glue and you can use a special cement-sand mixture, but experts say that the glue used is still advisable - that's why the second technology is not such an extension, as the first.

If you look like styling foam blocks should be made to glue on the video, you'll notice that experts can be used, both ordinary and special cold-resistant mixture.And choose the tile adhesive should be very careful, because of its quality depends largely on the success of the whole process.

But it also includes a foam block stacking technology?If you use glue, you'll have to act according to the following schedule:

1. foam blocks Sort order to select the most even of them;Installation
2. first series grout material;
3. Setting blocks in line with the application of glue (you can see on the video, what tools it uses);
4. Regular inspection of masonry with a laser level leveling or to avoid distortions as possible;
5. Production and the subsequent laying of the door and window of jumpers;
6. finalized the process of concreting a monolith for the subsequent installation of floor slabs.

Thus, it is clear that this work is very time-consuming.This is why many consumers are willing to entrust it to professionals, interested in, how much styling foam block.Note also that in most cases it is really advisable - for the first time dealing with the subject material is very difficult to use it correctly.Especially because many companies set the prices quite affordable.Just remember, before you make your choice, carefully consider a niche market, estimating how much styling foam blocks in the middle.After all, different companies are different fiscal policy, and your task is to get the services of the highest quality, not overpaying for them.