Installation of PVC panels - with their hands do lining the walls and ceiling

Highlights in

Before starting work, many are wondering how to install PVC panels.Consider the technology.Installation is often carried out on the crate of wooden slats volume 50h25 millimeters.But if the wall is fairly smooth, the panel can be attached directly to the surface with nails, staples or glue.Reiki battens attached to each other at a distance of 500 mm with screws or screws.

If mounting battens will be horizontal, the bars should be vertical, and vice versa.For precise installation battens must use level.How to mount PVC panels?This is done, starting with one of the corners with mounting brackets or finishing strips.If you are planning installation of the panels on the ceiling, the first thing installed ceiling moldings and panels are placed so that they came to the corner and plinth.

first panel is put into a corner and is fastened, the following shall be attached firmly to the previous, and are attached to the crate.The work begins with the near left corner.The last panel inserted into the finish and component snaps.All space dockings with ceiling and floor skirting close.

Note!PVC is easy enough to cut through and through, so difficulties with adjustment will not occur.

Step by step, are working

to make qualitative installation PVC panels, manual with a detailed description of the entire process will not be superfluous.Consider stepping operation:

• first thing done crate of rails, which fixed at 400-500 mm;
• Installation begins with the installation of external and internal corners and baseboards.The first panel is put into the groove of the angle by 5 millimeters, it should be made perfectly straight;
• second panel is inserted in the first groove and secured;
• last panel is shortened to 1 cm from the edge of the mounting and inserted into the corner profile.

If you plan to install any external components, it is necessary to do a supporting lath in the places where they will fasten these elements.This is due to the fact that PVC can sustain itself on not more than 1 kilogram of extraneous weight.To carry out the installation is not recommended at temperatures below zero degrees, and unpack all the stuff you need to at least 15 degrees Celsius.

After installation, care should be carried out with a soft sponge or cloth.It is strictly forbidden to use caustic cleaners or abrasive materials.After installation is complete, panels recommended to treat them antistatic.To make it more clear how to make installation of PVC panels, videos with all explanations will be very useful. Note!During the operation panel should be protected from mechanical impact.

tools needed in the work

PVC mounting technology panels will be incomplete without the transfer of the necessary tools.To work you need to have crates for electric installation.Also for the installation of all electric rails will need a screwdriver or screwdriver.With screwdriver work will proceed faster and less tiring, as it is necessary to tighten a large number of screws.High-quality and smooth installation of lathing is very important, so do will be very difficult without the use of level.It will help to evenly attach all the slats in a horizontal and vertical plane.

to fit all the panels used hacksaw on wood or metal.Generally, PVC is cut quite easy, so you can do a simple knife.If you plan to mount the panels with the help of clips, it will need a staple gun, and for nailing, respectively, a hammer.It is also necessary to prepare in advance a stepladder or a ladder to work on the ceiling and on the ceiling.

Important!All the tools have to be ready to get started, so that the process did not arise hitches.