Clean the chimney - the key to high-quality work of the furnace in a country house

reasons cleaning

furnace chimney The main reason of cleaning the chimney becomes excessive accumulation of soot.During the combustion of raw material stands out smoke with the residue of hazardous substances deposited on the surface of the pipe.Over time, it clogs the chimney, and the number of all the allocated air from combustion enters the room, most of the room is the kitchen, with its stove for cooking.The incoming air is hazardous to health, it poisons the lungs and can lead to shortness of breath.

Poor air circulation reduces the quality of housing heating.Negatively affects the entire heating system.Combustion is more like corruption.Gradually, the quality of the "work" of the furnace is reduced.The smoke starts to come out through the cracks of the walls, ash pit and other openings.The room can be constantly filled with smoke.

Soot has the properties of self-ignite.Degree of its combustion is able to achieve more than a thousand degrees.
right decision will advance cleaning of the chimney.

Additional factors contributing to the procedure of removal of harmful plaque in the wall are:

1. Soot comes from burning materials.Excessive accumulation of it is caused by the burning of non-natural materials: polyethylene, plastic, plastic, synthetic fabric.
2. Temporary non-use of an oven in the summer leads to the formation of dust and cobwebs.

help eliminate soot-quality cleaning of the chimney.It is necessary to carry out up to two times per year.Useful procedures become her constant review.

chimney cleaning components

Cleaning should be comprehensive.It includes:

• Eliminating combustion sources - of burnt wood and charcoal.After their use of the stove is cleaned with the help of metal blades.
• Cleaning grate ash.Lattice intervals proryazhayut iron instruments.
• Cleaning chimney.
• Disposal of ash from the furnace output.

Remedy burning in the chimney

consider several options - from classical to popular:

1. ancient method - cast into a burning oven potato peelings.Under the action of the starch alone will be printed black.

   

2. Using wire brush - a special device with a long rope and load.It is immersed in the chimney hole and smooth motion of rotating.

   

3. application of heat.It is necessary to adhere to the safety rules and be very careful.Recommended for heavy soiling.It produced during the combustion of wood, forming blowing furnace.

   

4. use of special tools.These include the "Chimney Sweep", "The log", "Kominschik".

   

more tips

Cleaning the oven - is a system, which implies the removal of soot and fumes from all areas of places of combustion.It is important to remove plaque smoky not only in the tubes in the furnace itself and its additional holes.After the completion of the internal "washing" is to move to the outside.
appearance of calcareous elements can be eliminated with vinegar.