How to paint with your hands antique

Painting furniture antique: how and what to paint.Step 1: Prepare the furniture to the aging

1. all protruding elements necessary to dismantle hardware.
2. for polishing the polished furniture is removed with a special solution in compliance with all safety regulations.
3. Remains of old paint can be treated with sandpaper (only if the presence of old paint is not included in the design intent).

1. Grease and dirt must also be removed from the surface with fine sandpaper, but for security reasons be sure to use a protective mask airway and ventilate the area.For greasy surfaces, use a soap solution.
2. putty furniture is not worth it, because the mask flaws furniture is not within the boundaries of this design decision.The main emphasis is placed on the defects.
3. Use chalk coloring creativity.They have a varied palette of colors and is easy to apply to various surfaces, including plastic.For color and do not need a primer treatment.Instead of chalk coloring agents can be used water-dispersed, but before using them be sure to prime the surface of the primer.This is to ensure that the paint is better to cling to a tree.Paint need a paint roller.In order to avoid stubborn stains cover the floor with plastic wrap.

Step 2: painting process antique

In order to adjust and adapt to the color is to start from the wrong side.This will help determine how much paint is needed on the video and whether to change the selected shade is necessary.You can then paint the front of the furniture large strokes, but not allowing the paint spreading.Next

paint layer may be applied if there is no sagging 1st layer.If they are found, remove sandpaper, and then to paint a coat of paint.To the roller from drying out, place it in a container with water.

Important!Apply new dye layers is possible only after the previous one is completely dry.A drying can last from one to five hours at acceptable temperature and humidity conditions.

Step 3: selection of effects to create a sense of antiquity

To create a rough and decaying effect, only one coat of paint is needed.To make furniture classically smooth, can be rubbed with fine sandpaper first layer, remove dust and apply a second coat.

Shabby view is created by applying and rubbing with fine emery paper in those places where it is most natural furniture wears, namely around the handles and corners.Rub should be to the point until the aged will not be achieved.And in the end walk around the coating light friction.

multi-layer effect coating old.It is necessary to apply two coats of paint, and then dry brush cursory walk contrasting shade.The method is also called "dry" as causing a bit of paint on the brush, wipe it with a cloth, and then this brush is applied a thin layer on the surface.To create the effect of the paint, which is ingrained in the structure of the tree, the "dry" method works similarly.

dirty from time to time.It involves the use of wax in dark places where people often leave their fingerprints.Technique of wax called "mastic".

Rough layered.Apply paint in several layers of chaotic, it is not necessary to use emery sheets.At the end of the furniture covered with transparent wax and dark for aging.

All of the above methods can be combined aging furniture.Do not be afraid to experiment.The main thing is not to hurry, or work in a hurry can spoil the whole plan.

Learn how to paint antique can be found on the video.

How to paint the walls a

antique painting walls antique also includes several stages:

1. begins with preparation: removal of dirt and old coatings.Old wallpaper and small remnants of tear off completely with a spatula.
2. then walls should be primed (a simple primer sold in any hardware store).Dries 4:00.
3. plaster or putty for painting is not required, because the negligence and abrasion of the walls will only benefit.The paint should contain latex, because only he will provide adequate stability of color and coating leaks.Brush must be a long-haired.

1. paint walls better circular movements.And the best time to time to press the brush to the pressure on the ground appeared roughness.They will create the effect of antiquity.The main thing is clear overwrite some brush and place the brush.Also you can use a loofah or nazhdachku with fine sand.
2. When the paint dries, it is applied to the technical effect of the wax and the ancient walls is ready.

luck in painting!Follow the tips and you are sure to succeed!