How to remove bubbles wallpaper

As pokleit wallpaper and smooth to avoid bubbles.Prepare the wall in front of the label

In the first step of gluing it is important to be well prepared wall.If necessary, they need to remove the old paint.This is followed to align the walls plastered and primed.If you do not, then a new coating will emphasize all the irregularities of the walls.

Set wallpaper and glue

Once the walls are prepared you can proceed to the next stage - the choice of materials.Wallpapers are: paper, vinyl, non-woven, textile, glass and liquid.Selecting the envy of the requirements for the quality and appearance.The choice of adhesive depends on the quality of the finished work, including whether the bubbles.

Pasting wallpaper the walls

When purchased, prepared tools and glue divorced for instructions go directly to the glueing.

order to smoothly paste first painting, you can use the plumb bob and chalk to hold a straight line guide.

Then measure off the required length and cut into the desired number of blades, up to 2 cm for the stock.

When the web can be cut, proceed to gluing.It should be applied as specified in the instructions or on the wall or on the web.If the wall is made of an absorbent material well, the adhesive can be applied to both surfaces.

important to give the bands a little time to soak the glue.impregnation time depends on their thickness.After they thoroughly soaked, you can start to stick them to the wall.

the effort spent on the bonding, the final result depends.Therefore, we perform all neatly and carefully.

first blade sticking through benchmark.After the band has on the wall, it is necessary to level and smooth press roller or soft cloth, making downward movement.At this stage it is necessary to make sure that no air bubbles were formed.Therefore, if you noticed a bubble, it is necessary to try to drive a cloth or roller.If it does not go out to get rid of him, then peel off the strip to his level and glue it again, expelling the air.

So We perform with the rest of the web.

final stage wallpapering without bubbles

Once work is completed, it is important to observe a temperature and avoid drafts, otherwise bubbles may appear.

If another undried walls, seen bubbles, it is not a reason for concern.Since these adhesive residue after dry, usually leveled.

How to remove bubbles on the wallpaper using a medical syringe after drying

If defects in the glueing found after drying the web, this is no reason to despair.It is necessary to equip the medical syringe with a needle, glue and a soft cloth or roller.

bubble need to puncture with a needle and iron it, to expel the air.Thereafter, a syringe with glue fill the void.A soft cloth or roller distribute the adhesive and excess wash with a wet sponge.After drying of the bubble will be over.

How to remove bubbles on the wallpaper with a sharp blade

This method is not desirable to use, but if you have a choice: to use them or glue the walls, then, clearly, we must try.

To remove bubbles, you need a sharp blade to make an incision at the bottom of the convexity.And to fill the bladder with a syringe glue, smooth roller.

at the incision site may remain after drying noticeable seam, so to begin with, it is best practice in the field of furniture.